General

I was just wondering, is there a way to create Notifications Templates? For example, we intend on using Pulseway to monitor workstations as well as servers. I'm quite happy to configure notifications for each server, but having to configure notifications for each individual workstation for all our clients is going to be a nightmare!

Maybe someone can shed some light on this. Using the PSA system, I have gone several times now into the Service Desk module, selected hardware assets and assigned them to their respective clients. Every 24 hours or so, as I am entering in tickets and trying to assign a hardware asset to those tickets, I am finding that a bulk of the hardware assets are reverting back to my company as the client asignee. I have have to repeatedly go back and re-assign those hardware assets back to the clients. Besides the colosal waste of time, it makes me wonder if any other information is not being retained in the databse. Any clue? Shawn

Can someone tell me how can we change the Pulseway Manager settings on a Group of PC'S remotely?

At previous RMM's we've utilized scripts to integrate ninite. We run the update switch to update all the appollications followed by the audit switch and write the results to a local text file. We then parse the file to verify that all third party applications are up to date triggering warnings and failed status's based on different logic, but to keep it simple let's say based on the count of the word "update" in the audit file, as this would mean that the applications have an update available. I can run the scripts using your scripting/automation engine, and i know scheduleing is coming soon so we can automate this, but I have not found a way to parse a text file from w…

Hi, This report fails for us (though eh legacy report on IPs works OK) - is there some setting we need to make ? It says Failed Status No data for the monitored network interfaces has been collected yet. Error Thanks

I am setting up the Ping Notification feature and need some insight into how it works. My understanding is that it pings the selected device every 5 seconds. Is this a consistent 5 seconds for as long as i have the device added to the ping feature? I don't know that i need it to ping every 5 seconds (can this be changed) 300ms for 1 minute, i dont understand this... how often is it checking the device? Any help would be appreciated, Thanks.

I am new to SNMP and I'm having a little trouble getting set up. I understand that SNMP works by trapping signals sent from the Agent and they are sent to the Master. I don't see any 'trapping" in the Pulseway set up. I have successfully discovered a test device and have been able to pull up the MIB/OID list. This list however makes very little sense to me as it doesn't explain what I am trying to monitor. Could somebody give me some depth in this subject. What is Pulseway monitoring exactly? How do i determine what the OID is? Is there any trapping actually going on? Any info would be greatly appreciated!!! Thanks, Aaron

Hello, In the PC Monitor Manager, is that the correct place to change the account password? If I change it from one of my servers, will that propagate to my other managed computers? Thanks!

We want to change the general password . Do we have to change at all clients the password or it will be automatically updated ? We have 111 clients in use ... Thanks for help

Is there a way to configure Pulseway to only send email notifications on critical alerts? I've had a look through the account settings and the agent but can't find anything immediately obvious....could someone point me in the right direction?

Hi, on the website it lists support@pulseway.com as an email address. It's quite handy as can forward an alert (so adding context and info to the question). However on doing so today, I got a bounceback: Hello ...., We're writing to let you know that the group you tried to contact (support) may not exist, or you may not have permission to post messages to the group. A few more details on why you weren't able to post: * You might have spelled or formatted the group name incorrectly. * The owner of the group may have removed this group. * You may need to join the group before receiving permission to post. * This group may not be open…

I have MegaRaid controller cards in several of my servers. On my Windows servers I can use an app called MegaRaid Manager that logs errors and other info to the application event log that Pulseway monitors for me wonderfully. However, on my Linux servers the app different, it is called StorCLI. I can get plenty of information from this and even have a log generated but I don't know how to get Pulseway configured to monitor it. Any help would be appreciated, Thanks, Aaron

Hi, I've setup the SQL Server server module, using a specific user login (who I know has permissions, as tested and used when checking the query later). I've then setup a notification using it, based on a query. However when that runs I get told that "NT AUTHORITY\SYSTEM" can't access the database. This doesn't surprise me, but I don't understand why it's trying to connect as that, and not the user I set up. Any ideas? Thanks

It might be good to create a Scripts section on the forum so that the members can share / exchange scripts etc.

IOS app updated to 4.9 today. The server apps did so a few days ago. I noticed the extra features described on the server apps first, but couldn't see any trace of settings or config for them in the application. In IOS we now have a "Tasks" icon on the main toolbar. And in it some sample automation tasks, and some sample reports. But I can't see any way of adding or changing either. And I don't even mean radical changes, even what surely are intended ones .... reports->templates->sample: Update for All systems. Although there's a "Parameters" item listed of 4 weeks data, you can't change it. Its the same for all the reports and automation tasks. Re…

Why only 100 systems in Trial..? Full version has no limit right?

Hi At the moment I'm running a 30-day trial of Pulseway Enterprise. Our users are working on terminal servers. Is it possible shadow a remote session through the Pulseway App for Windows Phone? I have added one terminal server and enabled "Remote Desktop" in the Pulseway Manager. But in the mobile app I can't see any option for remote desktop. Rgds

Hi, I have a simple .bat file sitting on my desktop that I'd like to execute from my Pulseway android app every once and awhile. Is there a simple way of doing this?

I have the Pulseway agent installed on 4 servers at one site. I was checking my weekly firewall report and Pulseway has sent/received 204GB of data in one week. This amount of data usage seems very excessive. Is this normal?

Hi, I have upgraded one of the PC from windows 7 to windows 10 but it still shows as Windows 7 Home Premium on the IOS App. How can I change this so it is correct ? Any help is appreciated

Hi guys I am, well trying to admin a problem on a client. Everything is ok on the app (iphone) but when I try to remote in to the client pc I get the following download errors? Is this going to be a long night? or have I missed something? Thanks in advance....D

I have a Jenkins job that runs clamav on some windows machines that i have. I would like to figure out a way that i can get notifications if a job doesnt run... is this something pulseway can do?

I am using pulseway to monitor many different machines mostly Linux and windows. The windows service notifications if pretty user friendly, however I am having trouble getting my Linux machines configured to alert me when a service goes down. Can I get some guidance please? I am using Debian Jessie. I am trying to monitor when the Freeswitch service stops I have tried editing the config.xml not sure if I am entering the correct information, however. thanks.

Hi within pulseway manager if I click on validate account it shows an error - there was no listening endpoint at... this was working fine until recently , any idea what may be causing this?