Linux

I'm trying to set up Pulseway on a Kerio server built on CentOS 7-6.1810.2.e17. When I use the command rpm -ivh http://www.pulseway.com/download/pulseway_x64.rpm I get the following error: error: Failed Dependencies: wget is needed by pulseway-6.1-5.x86_64 So what is it thats going wrong? wget is not used on CentOS, its a Debian command.

Hi, I'm using Pulseway with Unraid and it's working properly, but I'm getting a lot of these errors that doesn't make sense because I'm always with the internet. Long Story short. This error concerns me. Apr 13 06:55:22 Tower pulseway: Error while registering computer:SOAP 1.1 fault SOAP-ENV:Server[no subcode]#012"Timeout"#012Detail: connect failed in tcp_connect() Apr 13 06:55:53 Tower pulseway: Error while registering computer:SOAP 1.1 fault SOAP-ENV:Server[no subcode]#012"Timeout"#012Detail: connect failed in tcp_connect() Apr 13 06:56:01 Tower pulseway: Error while registering computer:SOAP 1.1 fault SOAP-ENV:Server[no subcode]#012"No route to …

I am running CentOS 6 and I can track most of my /etc/init.d services just fine - except for iptables. When the service is running, Pulseway reports that it is down. For example, these lines work just fine: <Service Name="ntpd" DisplayName="NTPD Service" IsDaemon="true" DaemonType="SYSVINIT" Path="" StartParameters="" CanBeStopped="true" Enabled="true"/> <Service Name="crond" DisplayName="Cron Daemon" IsDaemon="true" DaemonType="SYSVINIT" Path="" StartParameters="" CanBeStopped="true" Enabled="true"/> But this one does not <Service Name="iptables" DisplayName="iptables Service" IsDaemon="true" DaemonType="SYSVINIT" Path="" StartParameters="…

ERROR I installed successfully Pulseway on my MacBook and on my main Rig, I'm trying to install pulseway on my 2nd laptop with Ubuntu, I followed the procedure showed to install, I edited the Xml sample file with username and password and tried to start pulseway but if I request service pulseway status it shows me this error. any suggestion?

Hi Here I'm new so please be kind. I have gone trough the installation process outlined in a YouTube video to install the Slackware variant of pulseway onto Unraid. Unraid = latest RC2 6.something. By the error I understand something is missing. Error -:- /etc/pulseway# /etc/rc.d/rc.pulseway start Starting Pulseway Daemon ... /usr/sbin/pulsewayd: error while loading shared libraries: libssl.so.0.9.8: cannot open shared object file: No such file or directory Error! In the YouTube video it all works fine, obviously the Linux dependencies are met in the Video. It would seem that a library is missing. YouTube Video -:-…

We had a Rasberry Pi that I believe was offline during the upgrade to 6.0, I turned it on but it will not check in. I did try updating the login info, I don't believe the old Administrator account exists under the new user based system. But still no luck, I have noticed it does not encrypt the password when I restart the service if that is a clue what is wrong. Any ideas appreciated.

Hi, I installed Pulseway Agent on my RPI like they said on the Website. I went to the "config.xml" and entered my Username and Password. When I now go back to the Website it just showes "No systems monitored. Download and install the agent on the systems you want to monitor." I did everything like they said on the Website. I also googled and found out you have to install some SSL stuff, so I typed the command they said on the forum (sudo apt-get install ca-certificate) and the Console just says, that the Package "CA-Certificate" could not be found. What did I do wrong?

I did search the forum for the answer to this but couldn't find any. What options do I have if the sysadmin when I'm installing pulseway and decides to use supervise to run the services. Any ideas what I put for DaemonType and any other options? Is much appreciate it!

Hi, We are running a Linux based VCenter appliance. Do we need to install a Linux version of the agent on this appliance for it to show up as a separate entity under the server groups. Currently we have to access the VCenter from a server module from a different server. Many thanks.

Hello all, Running Ubuntu Server 18.04. Installed Pulseway service, went through the pulseway-registration, and it completed fine. Started the Pulseway service. Server will not appear in my Pulseway account. I saw a thread stickied that this is currently broken. Is there any manual work around that anyone knows of to get this Ubuntu machine reporting in my Pulseway account? Thank you so much for your time.

When installing the pulseway agent on my Debian Version 9.4 X64 proxmox VE 5.2-1 server I get the following. I have restarted the server 3 times now after each install attempt - I can't figure out where the log is located. An error occurred while starting Pulseway service. Please see log for more details. Here is the steps that I did to get started... root@Dell-R610:~# wget https://www.pulseway.com/download/pulseway_x64.deb root@Dell-R610:~# dpkg -i pulseway_x64.deb root@Dell-R610:~# pulseway-registration Would you like to register or unregister the system? [1] Register System [2] Exit Enter selection: 1 Please enter a username: ******** Please ente…

Hi guys, Has the Linux Client been updated yet for the new version of Pulseway? If not do we have an ETA on it? Cheers, Martin

Which is the correct directory for the config.xml file in Debian 9 please? /etc/pulse/ or /etc/pulseway/ (Agent installed into / etc/pulse/ by default) Below example config isn't working / what must we change? (Agent starts with no errors, but password remains visible and device is not showing up in Pulseway) ============================================== <?xml version="1.0" encoding="utf-8"?> <config xmlns="http://www.pulseway.com/linuxconfig"> <!--Pulseway Linux Monitoring Agent - pulseway.com --> <!--Account Information - Username: *** - Password: *** - UseCustomServer: enable this option only if …

Ok so the other day i got informed about pulseway by linus tech tips and it seemed a good idea for me to install it on my raspberry pi vpn server for monitoring. But a few days after that my sd card died and i decided to start from scratch and make a new vpn + install pulseway again. But now i cant get the pi to show up at all. I installed everything as this post described but cant get it to show up. I did try to search the problem on google but nothing i tired helped. My raspberry pi model is the 3b

As the title goes I just can't get it to authenticate my username. --------------------------------------------------------------------------------------------------- pulseway.service - LSB: start and stop pulsewayd Loaded: loaded (/etc/rc.d/init.d/pulseway; bad; vendor preset: disabled) Active: active (exited) since Sun 2018-09-30 16:56:59 CEST; 53s ago Docs: man:systemd-sysv-generator(8) Process: 16999 ExecStop=/etc/rc.d/init.d/pulseway stop (code=exited, status=0/SUCCESS) Process: 17053 ExecStart=/etc/rc.d/init.d/pulseway start (code=exited, status=0/SUCCESS) Sep 30 16:56:59 plexserver systemd[1]: Starting LSB: start and stop pu…

I have installed Pulseway on my unraid server and it has ben working great. I can monitor everything and shutdown/restart the machine. However, wake on lan is not working at all. I have enabled it in the BIOS and in the OS. I can wake the machine using my router, but not with the Pulseway app. In the config.xml file I have WoWAN set to true and the port to 9 (also tried 50000) and it still doesn't work. Is there something I am missing? P.S. I also have a Windows machine that has WOW working perfectly. Thank you for your help.

Seems like the package for archlinux is broken. The package manger will refuse to install binaries outside of bin, and will not follow symbolic links. I searched the forum recommending to use the --force option, but this option has also been deprecated in favor of the --overwrite flag, which does not resolve the issue with your packaging. Can we get an updated package, please?

I have a Linux Server that reports as up-to-date version 5.4. Is this correct? Because I can't move it in Pulseway 6.0 to another Organization or Site. I get an error message that the agent requires an update.

If you need to install on SLES15 or openSUSE LEAP 15 and are fighting with ssl1.0 and systemV script limitations from pulseway 5.4, I wrote a how-to over at Novell's Coolsolutions https://bit.ly/2PP1OuI

Hello, I've juste rebooted a Centos7 server. After the reboot, the Pulseway service is crashed : Aug 27 22:54:12 linuxopenvpn pulseway: Could not get server info SOAP 1.1 fault SOAP-ENV:Server[no subcode]#012"No Data"#012Detail: get host by name failed in tcp_connect() Aug 27 22:54:12 linuxopenvpn pulseway: Could not get existing notifications: SOAP 1.1 fault SOAP-ENV:Server[no subcode]#012"No Data"#012Detail: get host by name failed in tcp_connect() Aug 27 22:54:12 linuxopenvpn pulseway: Last error getting group policy SOAP 1.1 fault SOAP-ENV:Server[no subcode]#012"No Data"#012Detail: get host by name failed in tcp_connect() Aug 27 22:54:15 linuxopenvpn p…

Hi All, I am trying to install the agent on a Pi 3 with Raspbian Stretch Lite running. It looks like it has installed but its not showing up on the device list and the password in the config.xml does not get encrypted. I am a bit of a noob when it comes to all things Linux and I have just followed the website instructions. Has anybody else come across this? thanks Dave

We have a cPanel server using centos7 as based system, all monitors are fine except the hard disks seems can't detect any local drives and always shows "Data not available" as result. We do have other centos7 based system that runs pulseway and can detect all hard disks and mounting points as well. Do we have to enable any service for pulseway to detect the hard disks? Or there is some failure on system? Thank you. P.S. below is the result when runs df -h on the problematic server: Filesystem Size Used Avail Use% Mounted on /dev/mapper/cl-root 50G 19G 32G 37% / devtmpfs 16G 0 1…

Is it possible to configure thermal monitoring in Linux like it is in Windows?

I seem to be able to install the agent but not start the Pulseway service. Can anyone confirm that this agent does work on Mint 18.3? Thanks,

Hi I can't get pulseway to connect to the android app when it's running on my ubuntu 18.04 server. It worked just fine until I updated to U 18.04. Has this occured to any one else? Is there an solution?