Windows
Windows installation and configuration
403 topics in this forum
-
Hi got it all working with my iPhone and ipad to turn on Pc and shut down over wifi but if I try 3G it shuts it Down but will not wake it back up. I have forwarded Ports 9 and 7 on my netgear 2200 router. What else do I need To do
-
- 1 reply
- 3.6k views
- 1 follower
-
-
How should one upgrade to 3.7 in WinXP? I tried sending an upgrade command from my Android app and nothing happened. I also tried downloading the latest Windows Agent from the website and the install process would close on its own after executing. Afterwards, it still shows 3.6. What gives? Thanks in advance.
- 4 replies
- 3.6k views
- 1 follower
-
A bit of introduction: I'm a happy user of Pulseway Manager. I use Pulseway Manager Enterprise (but for this topic it doesn't really matter). I manage quite large deployment with 250 Pulseway monitored machines. Someone else installed (via GPO) and did some basic setup. After running basic setup for a while, someone else changed some settings and tweaked it a bit. Finally ... again someone said lets change things around... This got me to this point... I have to change: CPU For all servers CPU > 90% for 30minutes > CRITICAL RAM RAM on 1 HOST – 5% for 30 min > CRITICAL Disable Low RAM on VM's Disable Low RAM in Azure …
-
- 0 replies
- 3.5k views
-
-
We need the ability to monitor the GPU temperatures of our machines. Most of which run multiple GPUs I have installed the software to a test machine, but I am unable to locate GPU temperatures (CPU and MOBO only) Is this something I have done wrong, or can the PC Monitor software not monitor these?
-
- 0 replies
- 3.5k views
-
-
Hello, ich have installed the pc monitor on a pc for testing. Now the PC is defect and i can't start the pc. How can i delete the pc from the monitoring? thanks uwe sorry, i know my english is bad, hope you cant read this :-)
-
- 2 replies
- 3.5k views
-
-
Hi There We updated our Thawte certificate and applied the update to our dedicated pulseway server. We have a 2008 server that goes offline when applying the new cert, when we switch back to the old cert the server comes back online. We have an environment with over 70 Servers and this Windows 2008 enterprise server is the only one that gives us the following error when validating its credentials. Please advise what steps to follow? We have checked time and date settings, ensured machine is up to date. All the best, Thomas
-
- 4 replies
- 3.5k views
-
-
Is this OS supported? I got around one issue during install but remote desktop does not show any active sessions in Dashboard. Appears all other features work just fine.
-
- 2 replies
- 3.5k views
- 1 follower
-
-
Setting up a test environment for Pulseway, brand new server 2019 install, have loaded everything up as per normal, hoever when trying to validate another win2019 server for monitoring, i get the cold not establish trust relationship for the SSL/TLS secure channel with authorit '******.*****.***.**' any ideas?
-
- 1 reply
- 3.5k views
-
-
The current remote software I use allows me to Blank the Client screen. I searched the forum and didn't find anything on this here. I also poked through the settings and couldn't find one in Pulseway. Is there an ability to blank the remote screen out while I'm working? For instance, on my work computer I have confidential information, if I am working remotely I don't necessarily want someone to be able to watch what I have on my screen.
- 3 replies
- 3.5k views
-
it seems to me that i can't even use a self signed cert for the trial to test out the software? i don't understand this logic? or am i doing something completely wrong?
-
- 2 replies
- 3.5k views
- 1 follower
-
-
Hi, So I am currently trialing Pulseway and looking for a bit of help. What I am trying to do is the following: Have an automated way of installing Pulseway for Domain and non-domain joined devices and it go into the correct reporting groups etc For Domain joined, I understand I can install through GPO and then import configuration For non-Domain joined, I obviously will need to double click the msi file manually, but what I would like to do is have a way of importing the configuration automatically also. Is there no way of having custom msi files per customer? For instance, If I Built 10 different MSI files for 10 different customers and…
-
- 0 replies
- 3.5k views
-
-
Hello, I'm not able to register a new system with my existing Pulseway account. I am able to put in my user name, but password is greyed out so i am unable to enter it. I do not have a dedicated instance. When i click Authenticate, it gives me an error (attached)
- 8 replies
- 3.5k views
-
I use Windows 7 Ultimate x64 and I am unable to see my processor temperatures OR the Fan speed(Neither the case fan nor the CPU fan) on my iPhone My setup is AMD A10 5800K processor + ASUS F2A85 M LE Motherboard. Any solution? The only temperature it displays is the HDD temperature. Also; 1. Is there a way I can see the percentage marks while on the CPU utilization graph? Is this displaying the CPU usage of only one core or all of them? 2. Can I change the settings somehow to display the memory being used instead of FREE memory?
-
- 2 replies
- 3.5k views
-
-
Hi I'm getting this message when I try to connect to XenApp. Any ideas?
-
- 1 reply
- 3.5k views
- 1 follower
-
-
I've installed the connector but when I check my add-ins, the Pulseway PSA Outlook Extension is inactive with the load behavior of: Not Loaded. A runtime error occurred during the loading of the COM Add-in. I've tried checking the box to enable it. I've tried restarting Outlook. I've tried restarting the PC. I've tried uninstalling and re-installing the plugin. Where should I go from here?
-
- 3 replies
- 3.5k views
-
-
"The paid Team plan is designed for MSPs and IT departments and offers a collaborative environment with multi-account management, Remote Control and additional features such as Audit Log, White Labelling and much more. The Team plan starts from 20 endpoints. The Starter plan allows 2 free endpoints and maximum up to 19 endpoints." How does this work please - is there a pricing difference ? What happens when you buy your 20th licence - do you automatically move to a Team licence ? Many Thanks
-
- 2 replies
- 3.5k views
- 1 follower
-
-
Hi. It it possible to download some of your extra components durring unattended setup, or afterwards by command line etc.? Specificly we are talking about: System --> Remote Desktop --> Enable Remote Desktop --> Yes to download Monitor and Manage SQL Server --> Monitor and Manage SQL Server --> Yes to download Br, Martin.
-
- 2 replies
- 3.5k views
-
-
Hi, Just installed and bought a 3 comp licence, and I have a quite disturbing issue. I cant see my system in web app or ios apps. I still can receive mail or push notifications, i can read reports, but system loos like to be invisible.... I had no issue installing pcmonitor on a fresh 8.1 pro win. No firewall or antivirus installed for testing and same result Validation of account is ok and service running without problem. Thanks for help guys
-
- 3 replies
- 3.4k views
-
-
Good day dear community, I have been trying for some time to get the network monitoring up and running. I plan to monitor switches, firewalls and one or the other nas. However, the devices are shown as offline in Pulseway. All devices have "SNMP | v1 | Public" enabled.
-
- 4 replies
- 3.4k views
-
-
Hi all, During the 5.4.4 update, I have seen a few systems that have not restarted the Pulseway service. I thought the systems were offline, but it was only the Pulseway service not running. Has anyone else seen this?
-
- 3 replies
- 3.4k views
-
-
Hi all, My goal is to create a Win32 package to deploy using Microsoft Intune that auto registers the computer. I've done this successfully with agent version 8. However, today I cannot get it to work with agent version 9. Despite contradicting help information out there that directs you to use Orca, the .MSI file that is generated contains the appropriate information to auto-register the agent. In the past I've converted the .MSI to .INTUNE, created the app in Endpoint Manager and assigned it with success. I'm working on doing this process again with agent version 9. I can get it to deploy with Intune, however auto-registration fails. My process is the same…
- 2 replies
- 3.4k views
-
Hi - I'm running the PC Monitor on a Windows 7 x64 system, and everything is working perfectly, except that I can't see the fan speed when I go into "Hardware Details" on my iPhone. I only have one fan installed in the PC, and SpeedFan is able to see the fan speed. Any ideas?
-
- 1 reply
- 3.4k views
- 1 follower
-
-
the phone is samsung galaxy s 2 i'm ticking all the notificfation options and nothing when i run the test it's fine. i'm getting the alert. but i'm testing by unplugging the network cable for 2 minutes and nothing (i see in the program on the phone and website that the computer is offline). the option for offline monitoring for servers is ticked. what to do?
-
- 3 replies
- 3.4k views
-
-
Hi, We have recently moved our email servers - and the sysadmin@ourdomain.com address that all our notifications get sent to no longer works. If I change that address to anything else it works That address works fine from anywhere else (inside and outside domain) There may have been a hiccup on that address during the migration (it took a wile to get created on new system) - so I am wondering if you block addresses at your end in some way if they receive too many NDRs? If so how do we get it unblocked please. I can't think of any other possible explanation ? Thanks James
-
- 1 reply
- 3.4k views
-
-
I had a customers computer stolen from me. I didn't have Pulseway Installed. However, I did have CCleaner Cloud installed. CCleaner Cloud allows remote install of .MSI. I made a custom .MSI file with the help of the support team. It has all my creds and server info and doesn't install the icons. This is perfect. My only problem, and this is testing on a local machine before full perfection, is that the "PC Monitor" service doesn't automatically start after install. So how do I gain control. Is there something in the MSI i can edit to auto start the service? If I can, I can view the webcam and help police identify the user who stole my laptop. Please help!! …
-
- 2 replies
- 3.4k views
- 1 follower
-