Jump to content
shadow00caster

Error on Debian 9.1 Stretch

Recommended Posts

Yes, I rebooted.

08:04:00 ~:$ sudo /etc/init.d/pulseway status
● pulseway.service - LSB: Monitor and Control Everything IT from Any Smartphone or Tablet
   Loaded: loaded (/etc/init.d/pulseway; generated; vendor preset: enabled)
   Active: active (exited) since Thu 2018-03-01 08:00:13 EST; 4min 7s ago
     Docs: man:systemd-sysv-generator(8)
  Process: 384 ExecStart=/etc/init.d/pulseway start (code=exited, status=0/SUCCESS)
   CGroup: /system.slice/pulseway.service

Mar 01 08:00:11 pidp8 systemd[1]: Starting LSB: Monitor and Control Everything IT from Any Smartphone or Tablet...
Mar 01 08:00:13 pidp8 pulseway[384]: Illegal instruction
Mar 01 08:00:13 pidp8 systemd[1]: Started LSB: Monitor and Control Everything IT from Any Smartphone or Tablet.

 

Share this post


Link to post
Share on other sites

Please run the following command (dpkg -l | grep libssl) on your system and then send us the output.

Also, you can try to reinstall the Pulseway agent (it is possible that packages are linked incorrectly):

Remove Pulseway:     apt-get -purge remove pulseway     or     dpkg -P pulseway

And then reinstall it.

Share this post


Link to post
Share on other sites

I have the same problem on raspberry pi stretch.

I installed libssl1.0.0 but it still does not work.

 

Mar  6 23:40:59 raspberrypi systemd[1]: Starting LSB: Monitor and Control Everything IT from Any Smartphone or Tablet...
Mar  6 23:40:59 raspberrypi pulseway[19701]: /usr/sbin/pulsewayd: /usr/lib/arm-linux-gnueabihf/libcrypto.so.1.0.0: version `OPENSSL_1.0.0' not found (required by /usr/sbin/pulsewayd)
Mar  6 23:40:59 raspberrypi pulseway[19701]: /usr/sbin/pulsewayd: /usr/lib/arm-linux-gnueabihf/libssl.so.1.0.0: version `OPENSSL_1.0.0' not found (required by /usr/sbin/pulsewayd)
Mar  6 23:40:59 raspberrypi systemd[1]: Started LSB: Monitor and Control Everything IT from Any Smartphone or Tablet.
 

It now seems like I have 3 version of libssl

pi@raspberrypi:/etc/init.d $ dpkg -l | grep libssl
ii  libssl1.0.0:armhf                1.0.1t-1+deb8u7              armhf        Secure Sockets Layer toolkit - shared libraries
ri  libssl1.0.2:armhf                1.0.2l-2+deb9u2              armhf        Secure Sockets Layer toolkit - shared libraries
ri  libssl1.1:armhf                  1.1.0f-3+deb9u1              armhf        Secure Sockets Layer toolkit - shared libraries

It seems like libssl1.0.0 still points to 1.0.2

pi@raspberrypi:/usr/lib/arm-linux-gnueabihf $ ls -l libssl*
lrwxrwxrwx 1 root root     44 Mar  6 23:08 libssl.so.1.0.0 -> /usr/lib/arm-linux-gnueabihf/libssl.so.1.0.2
-rw-r--r-- 1 root root 320924 Dec 14 07:09 libssl.so.1.0.2
-rw-r--r-- 1 root root 327952 Nov  2 20:29 libssl.so.1.1
pi@raspberrypi:/usr/lib/arm-linux-gnueabihf $ ls -l libcrypt*
-rw-r--r-- 1 root root   41292 Jun 16  2017 libcrypt.a
lrwxrwxrwx 1 root root      47 Mar  6 23:08 libcrypto.so.1.0.0 -> /usr/lib/arm-linux-gnueabihf/libcrypto.so.1.0.2
-rw-r--r-- 1 root root 1493272 Dec 14 07:09 libcrypto.so.1.0.2
-rw-r--r-- 1 root root 1827948 Nov  2 20:29 libcrypto.so.1.1
lrwxrwxrwx 1 root root      38 Jun 16  2017 libcrypt.so -> /lib/arm-linux-gnueabihf/libcrypt.so.1
 

I cannot remove 1.0.2 so somehow I need to get a version of 1.0.0 not pointing to anything else

 

How can we solve this?
 

 

Edited by MickH2007
more information

Share this post


Link to post
Share on other sites

 

Please try this steps:

root@raspberrypi:~# rm -rf /usr/lib/arm-linux-gnueabihf/libcrypto.so.0.9.8 /usr/lib/arm-linux-gnueabihf/libssl.so.0.9.8
root@raspberrypi:~# dpkg -i libssl1.0.0_1.0.1t-1+deb8u7_armhf.deb
(Reading database ... 113263 files and directories currently installed.)
Preparing to unpack libssl1.0.0_1.0.1t-1+deb8u7_armhf.deb ...
Unpacking libssl1.0.0:armhf (1.0.1t-1+deb8u7) over (1.0.1t-1+deb8u7) ...
Setting up libssl1.0.0:armhf (1.0.1t-1+deb8u7) ...
root@raspberrypi:~# ln -sf /usr/lib/arm-linux-gnueabihf/libssl.so.1.0.0 /usr/lib/arm-linux-gnueabihf/libssl.so.0.9.8
root@raspberrypi:~# ln -sf /usr/lib/arm-linux-gnueabihf/libcrypto.so.1.0.0 /usr/lib/arm-linux-gnueabihf/libcrypto.so.0.9.8
root@raspberrypi:/usr/lib/arm-linux-gnueabihf# /etc/init.d/pulseway start
[ ok ] Starting pulseway (via systemctl): pulseway.service.

Share this post


Link to post
Share on other sites
13 hours ago, Chris said:

Please try this steps:

No change, same "illegal instruction" error and pulseway won't run.

Edited by windracer

Share this post


Link to post
Share on other sites
On 4/21/2018 at 5:12 AM, windracer said:

No change, same "illegal instruction" error and pulseway won't run.

Same here unfortunately

Share this post


Link to post
Share on other sites

I was able to get the client running on my Pi2b by running the following:

systemctl stop pulseway
wget http://ftp.debian.org/debian/pool/main/o/openssl/libssl1.0.0_1.0.1t-1+deb8u8_armhf.deb
dpkg -i libssl1.0.0_1.0.1t-1+deb8u8_armhf.deb
ldconfig
systemctl start pulseway
systemctl status pulseway

● pulseway.service - LSB: Monitor and Control Everything IT from Any Smartphone or Tablet
   Loaded: loaded (/etc/init.d/pulseway; generated; vendor preset: enabled)
   Active: active (running) since Sun 2018-07-15 02:16:42 AEST; 11s ago
     Docs: man:systemd-sysv-generator(8)
  Process: 18044 ExecStop=/etc/init.d/pulseway stop (code=exited, status=0/SUCCESS)
  Process: 18078 ExecStart=/etc/init.d/pulseway start (code=exited, status=0/SUCCESS)
   CGroup: /system.slice/pulseway.service
           ├─18085 /usr/sbin/pulsewayd
           ├─18106 sh -c awk -v a="$(awk '/cpu /{print $2+$4,$2+$4+$5}' /proc/stat; sleep 1)" '/cpu /{split(a,b," "); print 100*($2+$4-b[1])/($2+$4+$5-b[2])}' /proc/stat 2>&1
           └─18107 sleep 1

Jul 15 02:16:42 prkpi2b systemd[1]: Starting LSB: Monitor and Control Everything IT from Any Smartphone or Tablet...
Jul 15 02:16:42 prkpi2b systemd[1]: Started LSB: Monitor and Control Everything IT from Any Smartphone or Tablet.
Jul 15 02:16:42 prkpi2b pulseway[18085]: Configuration read successfully!

 

# uname -a
Linux prkpi2b 4.14.34-v7+ #1110 SMP Mon Apr 16 15:18:51 BST 2018 armv7l GNU/Linux

# dpkg -l |grep libssl             
ii  libssl1.0.0:armhf                 1.0.1t-1+deb8u8              armhf        Secure Sockets Layer toolkit - shared libraries
ii  libssl1.0.2:armhf                 1.0.2l-2+deb9u3              armhf        Secure Sockets Layer toolkit - shared libraries
ii  libssl1.1:armhf                   1.1.0f-3+deb9u2              armhf        Secure Sockets Layer toolkit - shared libraries

# grep -i pulseway /var/log/syslog
Jul 15 02:08:20 localhost pulseway[17976]: /usr/sbin/pulsewayd: /usr/lib/arm-linux-gnueabihf/libcrypto.so.1.0.0: version `OPENSSL_1.0.0' not found (required by /usr/sbin/pulsewayd)
Jul 15 02:08:20 localhost pulseway[17976]: /usr/sbin/pulsewayd: /usr/lib/arm-linux-gnueabihf/libssl.so.1.0.0: version `OPENSSL_1.0.0' not found (required by /usr/sbin/pulsewayd)
Jul 15 02:12:31 localhost pulseway[18023]: /usr/sbin/pulsewayd: /usr/lib/arm-linux-gnueabihf/libcrypto.so.1.0.0: version `OPENSSL_1.0.0' not found (required by /usr/sbin/pulsewayd)
Jul 15 02:12:31 localhost pulseway[18023]: /usr/sbin/pulsewayd: /usr/lib/arm-linux-gnueabihf/libssl.so.1.0.0: version `OPENSSL_1.0.0' not found (required by /usr/sbin/pulsewayd)
Jul 15 02:16:42 localhost pulseway: Starting Pulseway Daemon version 5.4 (2018021301)
Jul 15 02:16:42 localhost pulseway: Configuration read successfully!

Then checked the console and could see my Pi in there. Note the "ldconfig" command on the 4th line in bold - that updates the LD cache (linked libraries) which I'm guessing is why you were still getting the errors even though you had installed the v1.0.0 package.

Edited by ghodder

Share this post


Link to post
Share on other sites
On 7/14/2018 at 12:27 PM, ghodder said:

I was able to get the client running on my Pi2b by running the following:

That didn't work for me:

Jul 18 20:01:25 pidp8 systemd[1]: Starting LSB: Monitor and Control Everything IT from Any Smartphone or Tablet...
Jul 18 20:01:26 pidp8 pulseway[27509]: /usr/sbin/pulsewayd: /usr/lib/arm-linux-gnueabihf/libcrypto.so.1.0.0: version `OPENSSL_1.0.0' not found (required by /usr/sbin/pulsewayd)
Jul 18 20:01:26 pidp8 pulseway[27509]: /usr/sbin/pulsewayd: /usr/lib/arm-linux-gnueabihf/libssl.so.1.0.0: version `OPENSSL_1.0.0' not found (required by /usr/sbin/pulsewayd)
Jul 18 20:01:26 pidp8 systemd[1]: Started LSB: Monitor and Control Everything IT from Any Smartphone or Tablet.

But it's not started.

Share this post


Link to post
Share on other sites

Hi @windracer

Please try these steps:

root@raspberrypi:~# rm -rf /usr/lib/arm-linux-gnueabihf/libcrypto.so.0.9.8 /usr/lib/arm-linux-gnueabihf/libssl.so.0.9.8
root@raspberrypi:~# dpkg -i libssl1.0.0_1.0.1t-1+deb8u7_armhf.deb
(Reading database ... 113263 files and directories currently installed.)
Preparing to unpack libssl1.0.0_1.0.1t-1+deb8u7_armhf.deb ...
Unpacking libssl1.0.0:armhf (1.0.1t-1+deb8u7) over (1.0.1t-1+deb8u7) ...
Setting up libssl1.0.0:armhf (1.0.1t-1+deb8u7) ...
root@raspberrypi:~# ln -sf /usr/lib/arm-linux-gnueabihf/libssl.so.1.0.0 /usr/lib/arm-linux-gnueabihf/libssl.so.0.9.8
root@raspberrypi:~# ln -sf /usr/lib/arm-linux-gnueabihf/libcrypto.so.1.0.0 /usr/lib/arm-linux-gnueabihf/libcrypto.so.0.9.8
root@raspberrypi:/usr/lib/arm-linux-gnueabihf# /etc/init.d/pulseway start
[ ok ] Starting pulseway (via systemctl): pulseway.service.

Share this post


Link to post
Share on other sites

Still no luck.

Jul 20 22:00:53 pidp8 systemd[1]: Starting LSB: Monitor and Control Everything IT from Any Smartphone or Tablet...
Jul 20 22:00:56 pidp8 pulseway[16522]: /usr/sbin/pulsewayd: /usr/lib/arm-linux-gnueabihf/libcrypto.so.1.0.0: version `OPENSSL_1.0.0' not found (required by /usr/sbin/pulsewayd)
Jul 20 22:00:56 pidp8 pulseway[16522]: /usr/sbin/pulsewayd: /usr/lib/arm-linux-gnueabihf/libssl.so.1.0.0: version `OPENSSL_1.0.0' not found (required by /usr/sbin/pulsewayd)
Jul 20 22:00:56 pidp8 systemd[1]: Started LSB: Monitor and Control Everything IT from Any Smartphone or Tablet.
22:02:12 /usr/lib/arm-linux-gnueabihf:$ ls -la libssl*
-rw-r--r-- 1 root root 490932 Mar 29 06:51 libssl.a
lrwxrwxrwx 1 root root     13 Mar 29 06:51 libssl.so -> libssl.so.1.1
lrwxrwxrwx 1 root root     44 Jul 20 21:59 libssl.so.0.9.8 -> /usr/lib/arm-linux-gnueabihf/libssl.so.1.0.0
lrwxrwxrwx 1 root root     44 Jul 20 22:00 libssl.so.1.0.0 -> /usr/lib/arm-linux-gnueabihf/libssl.so.1.0.2
-rw-r--r-- 1 root root 320924 Mar 29 07:10 libssl.so.1.0.2
-rw-r--r-- 1 root root 327952 Mar 29 06:51 libssl.so.1.1

22:02:17 /usr/lib/arm-linux-gnueabihf:$ ls -la libcrypto*
-rw-r--r-- 1 root root 3143988 Mar 29 06:51 libcrypto.a
lrwxrwxrwx 1 root root      16 Mar 29 06:51 libcrypto.so -> libcrypto.so.1.1
lrwxrwxrwx 1 root root      47 Jul 20 21:59 libcrypto.so.0.9.8 -> /usr/lib/arm-linux-gnueabihf/libcrypto.so.1.0.0
lrwxrwxrwx 1 root root      47 Jul 20 22:00 libcrypto.so.1.0.0 -> /usr/lib/arm-linux-gnueabihf/libcrypto.so.1.0.2
-rw-r--r-- 1 root root 1497376 Mar 29 07:10 libcrypto.so.1.0.2
-rw-r--r-- 1 root root 1827956 Mar 29 06:51 libcrypto.so.1.1
22:02:23 /usr/lib/arm-linux-gnueabihf:$

 

Share this post


Link to post
Share on other sites

The Pulseway agent on your system still can not find the required SSL libraries.

Please do the following:

  1.  Uninstall the Pulseway agent.
  2. Reboot the system.
  3. Install the following package: 

              wget http://ftp.debian.org/debian/pool/main/o/openssl/libssl1.0.0_1.0.1t-1+deb8u8_armhf.deb

              dpkg -i libssl1.0.0_1.0.1t-1+deb8u8_armhf.deb

       4. And then install the Pulseway agent.

Share this post


Link to post
Share on other sites

Pretty sure I already tried that, but did it again. Still nothing, same result.

 

Jul 24 17:02:26 pidp8 systemd[1]: Starting LSB: Monitor and Control Everything IT from Any Smartphone or Tablet...
Jul 24 17:02:26 pidp8 pulseway[1032]: /usr/sbin/pulsewayd: /usr/lib/arm-linux-gnueabihf/libcrypto.so.1.0.0: version `OPENSSL_1.0.0' not found (required by /usr/sbin/pulsewayd)
Jul 24 17:02:26 pidp8 pulseway[1032]: /usr/sbin/pulsewayd: /usr/lib/arm-linux-gnueabihf/libssl.so.1.0.0: version `OPENSSL_1.0.0' not found (required by /usr/sbin/pulsewayd)
Jul 24 17:02:26 pidp8 systemd[1]: Started LSB: Monitor and Control Everything IT from Any Smartphone or Tablet.
17:03:34 /usr/lib/arm-linux-gnueabihf:$ ls -la libssl*
-rw-r--r-- 1 root root 490932 Mar 29 06:51 libssl.a
lrwxrwxrwx 1 root root     13 Mar 29 06:51 libssl.so -> libssl.so.1.1
lrwxrwxrwx 1 root root     44 Jul 20 22:04 libssl.so.0.9.8 -> /usr/lib/arm-linux-gnueabihf/libssl.so.1.0.0
lrwxrwxrwx 1 root root     44 Jul 24 17:02 libssl.so.1.0.0 -> /usr/lib/arm-linux-gnueabihf/libssl.so.1.0.2
-rw-r--r-- 1 root root 320924 Mar 29 07:10 libssl.so.1.0.2
-rw-r--r-- 1 root root 327952 Mar 29 06:51 libssl.so.1.1

17:03:37 /usr/lib/arm-linux-gnueabihf:$ ls -la libcrypto*
-rw-r--r-- 1 root root 3143988 Mar 29 06:51 libcrypto.a
lrwxrwxrwx 1 root root      16 Mar 29 06:51 libcrypto.so -> libcrypto.so.1.1
lrwxrwxrwx 1 root root      47 Jul 20 21:59 libcrypto.so.0.9.8 -> /usr/lib/arm-linux-gnueabihf/libcrypto.so.1.0.0
lrwxrwxrwx 1 root root      47 Jul 24 17:02 libcrypto.so.1.0.0 -> /usr/lib/arm-linux-gnueabihf/libcrypto.so.1.0.2
-rw-r--r-- 1 root root 1497376 Mar 29 07:10 libcrypto.so.1.0.2
-rw-r--r-- 1 root root 1827956 Mar 29 06:51 libcrypto.so.1.1

 

Share this post


Link to post
Share on other sites

I took yet another shot at this (since I got it to work by changing symlinks on my regular (Intel-based) Linux server) and it still doesn't work.

I installed libssl1.0.0_1.0.1t-1+deb8u8_armhf.deb and then fixed the libssl.so and libcrypto.so symlinks so they point to the 1.0.0 versions of the files (also tried 1.0.2):

11:18:19 /usr/lib/arm-linux-gnueabihf:$ ls -la libssl*
-rw-r--r-- 1 root root 490932 Mar 29 06:51 libssl.a
lrwxrwxrwx 1 root root     15 Sep 14 11:18 libssl.so -> libssl.so.1.0.0
lrwxrwxrwx 1 root root     44 Jul 20 22:04 libssl.so.0.9.8 -> /usr/lib/arm-linux-gnueabihf/libssl.so.1.0.0
-rw-r--r-- 1 root root 231240 Mar 29 09:00 libssl.so.1.0.0
-rw-r--r-- 1 root root 320924 Mar 29 07:10 libssl.so.1.0.2
-rw-r--r-- 1 root root 327952 Mar 29 06:51 libssl.so.1.1
11:18:21 /usr/lib/arm-linux-gnueabihf:$ ls -la libcrypto*
-rw-r--r-- 1 root root 3143988 Mar 29 06:51 libcrypto.a
lrwxrwxrwx 1 root root      18 Sep 14 11:18 libcrypto.so -> libcrypto.so.1.0.0
lrwxrwxrwx 1 root root      47 Jul 20 21:59 libcrypto.so.0.9.8 -> /usr/lib/arm-linux-gnueabihf/libcrypto.so.1.0.0
-rw-r--r-- 1 root root 1123652 Mar 29 09:00 libcrypto.so.1.0.0
-rw-r--r-- 1 root root 1497376 Mar 29 07:10 libcrypto.so.1.0.2
-rw-r--r-- 1 root root 1827956 Mar 29 06:51 libcrypto.so.1.1

The agent still fails to start:

Sep 14 11:12:45 pidp8 systemd[1]: Starting LSB: Monitor and Control Everything IT from Any Smartphone or Tablet...
Sep 14 11:12:45 pidp8 pulseway[32548]: /usr/sbin/pulsewayd: /usr/lib/arm-linux-gnueabihf/libcrypto.so.1.0.0: version `OPENSSL_1.0.0' not found (required by /usr/sbin/pulsewayd)
Sep 14 11:12:45 pidp8 pulseway[32548]: /usr/sbin/pulsewayd: /usr/lib/arm-linux-gnueabihf/libssl.so.1.0.0: version `OPENSSL_1.0.0' not found (required by /usr/sbin/pulsewayd)
Sep 14 11:12:45 pidp8 systemd[1]: Started LSB: Monitor and Control Everything IT from Any Smartphone or Tablet.
Sep 14 11:18:47 pidp8 systemd[1]: Stopping LSB: Monitor and Control Everything IT from Any Smartphone or Tablet...
Sep 14 11:18:47 pidp8 systemd[1]: Stopped LSB: Monitor and Control Everything IT from Any Smartphone or Tablet.

 

Share this post


Link to post
Share on other sites

I got a new Raspberry Pi 3 B+ (running jessie 9.6) and this is apparently still a problem. Any idea on when I'll be able to run the pulseway agent on a RasPi again?

Share this post


Link to post
Share on other sites

Interesting. Using @ghodder's instructions from July last year, I was able to get the 6.0.1 agent running on my new Pi 3 B+! But the same instructions fail to work on my original Pi B+. I noticed that the old Pi is armv6 and the Pi 3 is armv7. Maybe that has something to do with it?

Still waiting for that 6.1 agent on Linux! ;)

Share this post


Link to post
Share on other sites

Still waiting for 6.1 here also......cant get it to work on Raspbian stretch or on Ubuntu 18.04

It is 21 months now since this issue was opened.

Any news on when 6.1 will be released?

 

Share this post


Link to post
Share on other sites

@MickH2007

The Linux agent version 6.1 is already released. And libssl are embedded in the Pulseway agent, therefore this no longer should be an issue.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By knis
      I installed Pulseway on Ubuntu 16.10   64 bit.   It was success.
      I want only monitor HDD and CPU usage and Power off computer.
      I want disable other features in config.xml.
      How can I disable (I see mobile app) Users, Terminal, Scripts, Enter Maintenance Mode?
      Thanks!
    • By pheald
      I am running CentOS 6 and I can track most of my /etc/init.d services just fine - except for iptables.  When the service is running, Pulseway reports that it is down.
      For example, these lines work just fine:
      <Service Name="ntpd" DisplayName="NTPD Service" IsDaemon="true" DaemonType="SYSVINIT" Path="" StartParameters="" CanBeStopped="true" Enabled="true"/> <Service Name="crond" DisplayName="Cron Daemon" IsDaemon="true" DaemonType="SYSVINIT" Path="" StartParameters="" CanBeStopped="true" Enabled="true"/> But this one does not
      <Service Name="iptables" DisplayName="iptables Service" IsDaemon="true" DaemonType="SYSVINIT" Path="" StartParameters="" CanBeStopped="true" Enabled="true"/> Does anyone have any ideas?  I'm relatively new to Pulseway so it is entirely possible that I'm just missing something obvious.
       
      Edit: I just confirmed that I can start the service successfully when I manually stop it, but it still never detects it as running.
    • By mark.vail
      after following this setup guild i am getting "-bash: /etc/init.d/pulseway: No such file or directory"
      looked inside that folder and did not see any pulseway scrips. is there another guild that i can follow that will be more helpful 

    • By captainwhale
      Hi,
      I installed Pulseway Agent on my RPI like they said on the Website. I went to the "config.xml" and entered my Username and Password. When I now go back to the Website it just showes "No systems monitored. Download and install the agent on the systems you want to monitor."
      I did everything like they said on the Website. I also googled and found out you have to install some SSL stuff, so I typed the command they said on the forum (sudo apt-get install ca-certificate)  and the Console just says, that the Package "CA-Certificate" could not be found.
      What did I do wrong?
    • By patrickjung
      I hope I am in the right Subforum to ask this question.
      I recently started to use Pulseway and am impressed what I am able to do with it but I noticed one feature missing that I need.
      Is it possible with Pulseway to check Servers/Clients with log files for backups if they have been successful or failed? For example if there is a NAS connected to a network and someone is doing a USB Backup on it I want to check if it has failed so I will get a notification when it fails. I want to use it on Windows and Linux machines so my best guess is to use a script of somekind right?
       
×
×
  • Create New...