Notifications

Email notifications are disabled by default in Pulseway. To enable them start Pulseway app on your computer and click the "Change Account Details" button on the Account tab. You will then be able to enable email notifications in the Account Details dialog.

Been using Pulseway since it was PC-Monitor, for at least 3 years now. I noticed earlier this year (maybe about the time it was change to Pulseway) that notifications about my WINDOWS machine changed from being SMS alerts to my phone, to emails. I made no changes at all (in fact I haven't touched it since it was installed. It really is that good). I assumed this was a policy decision at Pulseway towers, and forgot about it. However, today, I have upgraded my Debian server, and reinstalled Pulseway on it. ... 1) Didn't there use to be a GUI to configure it under Linux ? 2) When it started the service, I got an SMS message !!!!! Now personally I …

I am getting a Notification for low disk space from one server, where I have removed all configured Storage Notifications. This is on a Windows Server (2012 R2) I had two storage notifications set up. One for C: drive and one for E: drive. The E: drive one was set for notifying when storage dropped below 25%. I wanted to change that to "less than 10GB" so made that config change. However, I kept getting the Notification for "below 25%". I have now removed all Storage Notifications, and I'm still getting the "below 25%" notification. Is there a further 'clean out' that I can do to stop this 'phantom' notification? Cheers, Geoff.

Is it possible to setup a notification if a NT Service is not running after a period of time?

Hello, I am new using pulseway and i've been looking at the issues and I haven't seen anything about it then, need to know if there is any way to download notifications as a file, can anyone help me with this?. Thank you.

Is it possible to become an email notifications if the monitored pc is offline (like Bluescreen)

Hello! I am using Office 365 as my email solution and I am not able to receive your email notifications since yesterday (23.09.2012). Your emails were marked as SPAM and since today all email notifications are lost. It is even not possible to receive your validation email. Is this an isolated problem of mine or does anyone else see this? MJR

How does the S.M.A.R.T disk notification work? I have over 200 desktops with this checked to send me a notification if triggered. I have had multiple hard drives go bad without one notification. I have even installed Acronis hard drive monitor on a drive and it comes back with errors, but still nothing from Pulseway.

Hello forum, Lately I encountered a machine that couldn't monitor CPU-temp. There were just no devices in the hardware list when I tried to set the notification. The machine in question is an HP ProLiant DL380 G4 and the OS is installed directly on the machine, not using Hyper-V or similar software that could mess up these kind of sensors. Any ideas? - Jaapyse

Hello, I was wondering if it is possible to get a notification if a file exceeds a certain file size. In my case I want to get an alert when a file or a folder exceeds 5 GB. Is that possible? I only found an option to either monitor the whole harddisk or get an alert when a file changes in size

Can I set it up so that it notify me when print queue is > 1 for any length of time? Basically, I want to be notified if my printer is being used and not necessarily limited to duration of # of print jobs. Thanks in advance!

Can someone help me figure out how to set up a notification when my computer is not connected to the internet. I am having trouble with my ISP and would like to be notified when the internet goes down. Thank you

Hello, Is it possible to trigger a script/file or command when a specific notification settings is met? e.g. when system temperature is critical i would like to suspend the computer as well as sending my self an email notification. Can this be done? Thanks! Love the program by the way

So the issue I'm having is with the mobile app on Android. I can log into the app and see notifications there, but I don't receive any notice through normal Android notifications. On the web client, I can see the device listed under Monitoring Devices with Push Notifications - No, but I cannot find where to enable this in the settings of the web app or mobile app!

Hi Marius, I'm loving this software day by day. The only thing that I find difficult is that when I need to change something in the configuration I need to operate on the PC client. I'd love to have a control panel on the mobile to help me modify my configurations. For example to add or modify notifications for events. Thanks Daniele

Hello, I would like to get PC Monitor to notify me for any new Error events added to the Windows Application event log. If I try to leave the textboxes for Keywords, Event Ids, and Sources empty I get an Error message: "No keywords, event ID's or sources specified." Is there a wild card character I can use? I tried entering an asterisk(*) in the keywords textbox but it does not appear to be working. Thanks Chuck

Hi, My objective is to monitor Veeam backup and agent jobs in the most efficient way. Since there's no feature to monitor Veeam backup, the only way I know is to make use of Windows Event logs. When I tried to setup a new policy I found out that Pulseway web app only allows you to monitor "Application, Security and System" event logs. Problem is Veeam event logs are stored in a separate section under Windows event logs (Application & Services logs -> Veeam Backup). So according to my understanding this wouldn't work for Veeam. The other possible way of doing this is to configure to monitor Veeam backup event logs from the Pulseway Manger in a server…

Been searching everywhere trying to figure out how the email notification feature works in PC monitor but I'm getting nothing. There are alot of info on how to set it up but no info how the actual email engine works? The reason I ask is because we've recently migrated our email server. I originally thought that PC monitor emails the mail server based on the MX record it gets when it polls the domain name of the email address that we specify (e.g. notification@domain.com) from the DNS server so we've update or internal MX record to point to the new exchange server and configured it as a whitelist on our receive connector but we are still not getting any email alerts. It …

I noticed that rebooting a client (whether via Pulseway or locally) always triggers the "Antivirus real-time protection is disabled" notification. My guess is that Kaspersky needs a while to startup, long enough to trigger "AV disabled" condition. Systems: Win 10 Pro, AV: Pulseway Kasperksy Is there a way to avoid these false alarms? Thanks! Susanne

Hi, I wanted to know if there was any way of monitoring the USB and/or COM ports on the computers. If not, will there be any future updates for this? I want to have the ability to monitor any USB's or COM's that have been inserted into the computers I am monitoring. Thanks, Nick McAuliffe

My Kamailio has gone down twice in the last two weeks and i have not been getting notifications through Pulseway. Above is the Kamailio service in a running state and below is my configuration set up, for that service to be monitored. Any guidance in fixing this problem would be greatly appreciated.

I would like a notification when a new system is added. Why? This will then create a Ticket in PSA allowing me to add the asset to the correct account

Using USB external hard drive as backup devices and each drive can be recognized if manually added to the notifications/storage screen but I need to know if there is a way to set this to be automatic when the drive is replaced either daily or weekly. Also, where would this be set globally for are servers being monitored. Currently have 8.6.8. Thank you, Todd Kollars Onsite IT Services

Hi, We have just installed the software and have been looking at the Event Log Notification feature. We want to be able to send a notification if a backup routine is successful. Looking through the event log i can filter by the Event Source, but there are around 10-15 events fired per backup routine with the same Keyword & Event ID. The unique identifying log is by a value within EventData, as we only want to be notified if the backup fails. Is there anyway of adding to the filter to look at the contents of EventData. Example below. (Info 6C8F1F7F) - <Event xmlns="[url="http://schemas.microsoft.com/win/2004/08/events/event"]http://schemas.microsoft.com…

Hi, For many servers I want to disable the 'Send a notification when updates are available with priority' option. I would like to know if there is any PowerShell command which disables this function in the Pulseway Manager (Agent)? Kind regards, Laurens