Windows

I have two PCs on my local network, 1x Windows 10 home - wakes via 4G cellular network and local LAN 1x Windows 10 Pro - only wakes on local LAN I've tried forwarding port 9, checked that the NIC settings are correct (magic packet etc...), made sure the drivers were up to date, disabled fast boot (though it is enabled on the one that works) and checked the Pulseway settings (same for both PCs). I can't work out why one wakes and the other doesn't. The both have the same type of NIC. Any help?

Hey guys, I'm fresh to Pulseway, and I must say this stuff is an eye opener to our current remote access tool!! I do have a few questions that I would like to ask before converting our 100+ devices to Pulseway. We have a satelite PC's and laptops that we want to install Pulseway on (which we would do unattended for the majority of).. Without having to go into each and every config afterwards and password protect the config with 'click here to prevent changes' and lock it down - is there a global change option that we can do for this? - the issue I have is with leaving this open is that someone only has to make changes to the username, password and servernam…

Hi, Here is how I recently "decommissioned" and uninstalled my service files from a machine: Beware: use the rd and del command at YOUR OWN RISK! run these from your remote service app or Pulseway terminal; 1. Check for your Support files and remove; dir c:\PathToSupportFolder\*.* rd <- remove directory, /s including sub-folders, /q just do it! rd /s /q C:\PathToSupportFolder\FolderAndSubFolderToRemove repeat with other sub-folders as needed. Check folders are removed dir c:\PathToSupportFolder\*.* Delete one file: del c:\PathToSupportFolder\filename.ext 2. If you have your own service files in the User Profile folder: Chec…

How about firewall rules for enterprise servers? I can't get it to work. - Jaapyse

I'm not sure what I'm doing wrong, but I have set this up so that I can ping the Access Points in the building to confirm that they are on. But I'm getting the following error back from system. Error below Pinging '10.0.1.3 (AP1)' ended with an error on computer 'PKY' in group 'Default' for the last 5 minute(s).Error: ErrorRegards,Pulseway

Hi I am currently testing Pulseway Remote Desktop on my own network and have RD, Manager and Dashboard installed on both Windows 7 and Windows 10 PC's. Both systems can see each other in Manager etc. but when I launch an RD session I get the error, "The agent failed to start the session" any ideas. Thanks in advance, D.

Hi, Im trying to monitor two network shares. What is the best way to monitor two network share paths in Pulsway? Thanks Tony

Where are these values set? I can see the System Manufacturer, but nothing i change in the registry will get the model to change from "To Be Filled by O.E.M" - I'd like to get my motherboard model in there.

Hi. It it possible to download some of your extra components durring unattended setup, or afterwards by command line etc.? Specificly we are talking about: System --> Remote Desktop --> Enable Remote Desktop --> Yes to download Monitor and Manage SQL Server --> Monitor and Manage SQL Server --> Yes to download Br, Martin.

Hey, I'm having trouble getting my pc to wake up using my phone. Suspend/hibernate work just fine. I've disabled fast startup, opened the ports on the modem and in the firewall settings, went into bios and enabled wake on lan, in the network adapter settings, made it so that device can wake the pc and enabled magic packets. Not sure what else I need to do. Any help would be appreciated. Thanks.

Hi All, I have a handful of computers and I only have remote access to them. Is there a way to import/push a config to a site without having to "log on/load the app/import config"? I can edit the config settings remotely but cannot import remotely. Can this be done? Thanks Tony

Is it possible to split-up alerting in such a way, that PulsewayUser1 receives alerts for Server Group A,C,D and PulsewayUser2 receives alerts for Server Group B,E,G and so on (until used the 5 Pulseway accounts) ? ie.: User2 should NOT receive the alerts comming from other but his/her own servergroups Regards, Martin

With iPad Pro controlling Win 7 Pro PC I have no problems with connecting on my LAN. I am also able to connect over an external internet connection (WAN) If my PC is switched ON it is always available to the iPad Pro on the WAN. I can then Suspend or Shut Down the PC. However I then only have a time window of about 5 minutes for Wake Up to work. If I leave it any longer than 5 mins Wake Up will not work. Has anyone any suggestions for this problem ?

Hello, I created a windows agent config file by exporting from an existing installation with the Remote Desktop module installed, but when I use that configuration with a fresh installation Remote Desktop module does not install. Is this normal? Is there something else that needs to be done to have the Remote Desktop module install automatically?

Hello, Is there a method to update the Pulseway windows agent remotely on a workgroup machine? Or is this done automatically after installing Pulseway? Thanks

just installed in Msft Lumia 550 and installed pulseway mgr into PC. Created the account, I see the PC in monitoring sys and the smrtp in monitored devices. I can receive notifications from PC to smrtp but not vice-versa. Something is missing in my configuration? How can I have notifications from smrtp to PC? Please help, if possible

Hi All, I'm trying to configure Pulseway on a virtual Server 2008 R2 box however when trying to set hardware alerts for things like HDD useage the field just appears blank. When I then go to try and setup a hardware monitor that list also appears blank. Obviously the server itself picks up the hardware or it wouldn't work. I know that it works in a virtual environment as I'm using it to monitor another virtualised server with no issues, including disk space. Has anyone else experienced this or got any fixes to try? Cheers, Dan

Hey guys, Almost at the end of my trial period and liking almost everything I see so far, with two nitpicks. One is the lack of file transfer, but I'm told that's "on the roadmap." The other is "unattended installation." To me "unattended" means someone just has to run an executable and it works. For example, I'm coming from Meraki Systems Manager. They produce an installer that is account specific, so I just need the person at the remote machine to download and run that file, hit next next next, and then the agent checks in with home base. The user doesn't need to know anything about anything. Most of my user base is spread very far apart, with one or maybe two…

Having problems getting WoL on my media server pc working. Before Windows 10 i was on windows 7 and all i had to do was turn on WoL Magic Packet and it works. Now, I enable it and cant get it to wake up. Plus, if I shut down remotely via the iOS app the PC shuts off and a couple seconds later powers itself back up. The PC stays off if I shutdown directly from the windows start menu. The only thing thats changed other than the OS is now im stuck with the generic drivers Windows 10 installs for my Intel LAN. I no longer have any drivers or configuration applications as they appear to have stopped releasing them for this adapter.

So following the directions it's pretty odd. Installed the Agent/Desktop Manager on a test server and this is what I'm getting... Cannot validate, though the service starts anyway (I though in the directions it said machines wont populate unless the service is started and the service won't start unless validation is complete. All I'm getting is a constant username/password error. Even after password resets. Current passwords on 2 different accounts allow me to login into everything else, Dashboard etc...Go figure... So yeah, no idea what the deal is here.... Regards, Joe W

Good Morning (Australian Time) ive started using Pulseway for a few of my clients and have found that if i reboot the machine, Pulseway doesn't automatically start up again on two of them, was wondering whats going on, one is a win 8.1 machine the other is win 10. If i manaully log onto the machine i have to open pulseway and press start services for the device to start responding to dashboard, remote control etc..

Hi, I'm having trouble configuring alerts for Windows Server Backup. I have enabled and configured PowerShell User Impersonation, but when I try to 'Validate Requirements and Settings' in the Windows Server Backup section under Server Modules, it returns with error 'ExecuteChecks timed out after 15 seconds'. The system is Windows Server 2012 R2 datacentre edition configured as a workgroup machine (not on a domain). Thanks in advance! :-)

Hello, On my new computer I can only see the temperatures of the hard-disks. I cannot find anything in the configuration to activate the rest of the sensors. Am I overlooking something? Motherboard: GIGABYTE Z170X-Gaming 3 (Intel Z170 (Skylake PCH-H)) CPU: Intel Core i7-6700K Skylake-S GPU: GIGABYTE GeForce GTX 980 Ti OS: Windows 10 Home Build 10240 Best regards, Aloyse

Using the free 4 computer setup. Had a problem with one machine - Windows 7. Got it back up running and installed Pulseway but cannot see the machine in the Manage Systems section on the machine or any remote client such as Android. Uninstalled Pulseway Verified dot net to be correct and reinstalled Striped registry of all PC Monitor and Pulseway entries Installed Pulseway again but still will not show in any Managed Systems Any help - suggestions?

Hello everyone, I have over 15 servers with Intel motherboards. I noticed that the servers with a super-micro board seem to report more information under hardware. The only thing I get for Intel is the CPU temps. The super-micro board reports the motherboard model, Fan speeds, hard drive temperatures ect. one board that wont work is: Intel S1200BTL and one that does work is: Mainboard - Supermicro X9SCL/X9SCM