Linux

Hi there, I've running pulseway for several month, but now I experienced some problems. When I start the pulseway service, I get the following error in syslog: kernel: [57666.481308] traps: pulsewayd[4301] trap stack segment ip:483fab sp:7fff44b05e50 THX for help in advance!

Hi, I have installed pulseway on server with centos 6.6. I have configured the file config.xml and the system notify me when his UP or DOWN. But i need to configure the notification when a service shutdown. I try with this code <Service Name="orkaudio" DisplayName="orkaudio VCR" IsDaemon="true" DaemonType="UPSTART" Path="" StartParameters="" CanBeStopped="true" Enabled="true" /> or <Service Name="orkaudio" DisplayName="orkaudio VCR" IsDaemon="true" DaemonType="SYSVINIT" Path="" StartParameters="" CanBeStopped="true" Enabled="true" /> without success. On the console i start and stop the service with: service orkaudio start service orkaudio stop Witch i…

I've installed Pulseway (4.8 agent) on my Raspberry Pi B+. In the syslog, I am seeing these messages repeated every 15 seconds: Oct 1 09:31:00 pidp8 pulseway: free_percentage 82 Oct 1 09:31:15 pidp8 pulseway: free_percentage 82 Oct 1 09:31:30 pidp8 pulseway: free_percentage 82 I have all the syslog stuff in config.xml set to Disabled="false". On my Ubuntu box (also running the 4.8 agent) I'm not seeing these repeated space check messages. On both, I have the LowHDDSpace setting enabled: <LowHDDSpace> <Hdd Percentage="10" Path="/" Priority="0" Enabled="true"/> </LowHDDSpace> Is there a way I can stop these syslog messages?

Ok so the other day i got informed about pulseway by linus tech tips and it seemed a good idea for me to install it on my raspberry pi vpn server for monitoring. But a few days after that my sd card died and i decided to start from scratch and make a new vpn + install pulseway again. But now i cant get the pi to show up at all. I installed everything as this post described but cant get it to show up. I did try to search the problem on google but nothing i tired helped. My raspberry pi model is the 3b

Hello all, Running Ubuntu Server 18.04. Installed Pulseway service, went through the pulseway-registration, and it completed fine. Started the Pulseway service. Server will not appear in my Pulseway account. I saw a thread stickied that this is currently broken. Is there any manual work around that anyone knows of to get this Ubuntu machine reporting in my Pulseway account? Thank you so much for your time.

Hi, I have installed the deb (latest one, from website) and setup the xml setup file, but the Raspi doesn't show up in the system-list. cat /var/log/syslog | grep pcmonitor shows: GET_SERVER_CERTIFICATE:certificate verify failed"#012Detail: SSL_connect error in tcp_connect() Jan 24 16:32:23 raspbmc pcmonitor: Error while registering computer:SOAP 1.1 fault: SOAP-ENV:Client[no subcode]#012"SSL_ERROR_SSL#012error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed"#012Detail: SSL_connect error in tcp_connect() THX!

What is this error? [root@~]# /etc/init.d/pcmonitor status pcmonitord (pid 23215) is running... [root@myomni ~]# /etc/init.d/pcmonitor status Message from syslogd@at Mar 27 06:19:39 ... * glibc detected *** /usr/sbin/pcmonitord: double free or corruption (fasttop): 0x00000000023c4a40 *** pcmonitord is stopped [root@~]# /etc/init.d/pcmonitor status pcmonitord is stopped [root@myomni ~]# uname -r 2.6.32-358.0.1.el6.x86_64 [root@myomni ~]#

Hi Pulseway, Why when i try to start the monitor on centos6 that rep me that -bash: I have alredy installed the RPM file and modified the config.xml.sample that i renamed to config.xml Command : CentOS6 rep: Can anyone help me ?

Hello All, This morning I discovered Pulseway. This product might be the solution to a number of "issues" I have. I have a home media server running Ubuntu 12.0, along with a Win 8.1 laptop and a Win 7 desktop. I've successfully installed agents on all three. In my linux server, I have a total of one system disk and three data disks. All four appear when I access the server in the "mypulseway.com" web browser. However in the Windows 8 application, it only shows one of the three data disks. Is there any way to correct this?

Hi, I am on trial of pulseway. I notice that I wasn't able to install pulseway agent for xenserver 6.5. On this version xenserver is now using 64bit but they're still using centos 5 (not 6) for their base system. Because of this I wasn't able to install the 64bit agent as it requires dependencies from centos 6 which doesn't exists on centos5. Is there a solution for this? Thanks

I am using my personal Raspberry Pi B+ to test Pulseway Linux before we try on live Ubuntu 12 servers. I have been able to get everything working except the online/offline/shutdown alerts. Here is a copy of my current config section. I added Priority="0" to WhenOffline hoping I would get a notification, but the icon still only changes to grey on the Android app. There is also no notifications for OnShutdown or when it comes back OnLine. <!--Send a notification when the computer is offline--> <WhenOffLine Priority="0" Enabled="true"/> <!--Send a notification when the computer is online--> <OnOnline Priority="2" E…

Was there a Pulseway service outage last night, perchance? I found this repeated error over and over in my syslog from 2:28am through 6:19am EST this morning: Jan 7 06:11:52 pidp8 pulseway: Error while registering computer:SOAP 1.1 fault: SOAP-ENV:Client[no subcode]#012"Try Again"#012Detail: get host by name failed in tcp_connect() During that time, Pulseway recorded the machine as being down (which it was not).

Downloading and installing the Arch package fails: $ sudo pacman -U pulseway_x64.pkg.tar.xz loading packages... resolving dependencies... looking for conflicting packages... Packages (1) pulseway-4.9.3-1 Total Installed Size: 4.53 MiB :: Proceed with installation? [Y/n] (1/1) checking keys in keyring [#######################################################################################] 100% (1/1) checking package integrity [###################…

I recently installed the latest version of Pulseway on my Ubuntu 17.04 server. The service appears to be starting, and I'm not seeing any errors. However, the machine never shows up in the Pulseway app. I feel like I'm missing something simple here. Any advice would be greatly appreciated.

I am testing PC Monitor out on my home network. Everything is going well, except I cannot seem to get stats for eth0 on my Linux machines. All other data (CPU, Disk, etc) is showing just fine for the two Ubuntu 12.04 systems, only network data is absent. I followed the install guide from this forum and edited the config file appropriately (I think). What am I doing wrong? Can anyone confirm they get network data on Ubuntu 12.04? My config and ifconfig output are below. Thanks, Brian My config.xml: <config xmlns="http://www.pulseway.com/linuxconfig"> <!--Account Information--> <!--Username: Your Mobile PC Monitor username--> <!--Passw…

Hi there, I have looked through the whole config file and can't seem to find where to enable the notifications for user log on actions is there something I am missing? It was in the previous version and it is something quite useful to me, if it is still there can you give me the command to re add it into my config file please?

can anyone show me how can i connect Pulseway to monitors mysql, and Ruby App ? mysql is on /usr/sbin/mysqld -> <Service Name="mysql" DisplayName="MySql" Path="" StartParameters="" CanBeStopped="false" Enabled="true"/> but what about setting ' IsDaemon="true" DaemonType="UPSTART" ' ? SYSV, UPSTARTD and SYSTEMD ? I have same problem with puma from rails server, its on (unix:///home/test/prod.sock)

Hello, I've made a new fresh install on a Raspberry Pi 3. I've followed the instructions of the "Install and Setup Agents / Raspbian" page. As usual. Service does not start correctly. The syslog shows raspberryXyz pulseway[854]: /usr/sbin/pulsewayd: error while loading shared libraries: libssl.so.1.0.0: cannot open shared object file: No such file or directory Any hint to solve this problem? Thanks in advance. Best regards, Guy

Good day when logging in, user priority is set at 2 and when logging out at 3. The notifications come as cricital! What am I doing wrong? <!--Send a notification when a user logs in--> <UserLogsIn Priority="2" Enabled="true" /> <!--Send a notification when a user logs out--> <UserLogsOut Priority="3" Enabled="true" />

We have a cPanel server using centos7 as based system, all monitors are fine except the hard disks seems can't detect any local drives and always shows "Data not available" as result. We do have other centos7 based system that runs pulseway and can detect all hard disks and mounting points as well. Do we have to enable any service for pulseway to detect the hard disks? Or there is some failure on system? Thank you. P.S. below is the result when runs df -h on the problematic server: Filesystem Size Used Avail Use% Mounted on /dev/mapper/cl-root 50G 19G 32G 37% / devtmpfs 16G 0 1…

Hi All, I am trying to install the agent on a Pi 3 with Raspbian Stretch Lite running. It looks like it has installed but its not showing up on the device list and the password in the config.xml does not get encrypted. I am a bit of a noob when it comes to all things Linux and I have just followed the website instructions. Has anybody else come across this? thanks Dave

Seems like the package for archlinux is broken. The package manger will refuse to install binaries outside of bin, and will not follow symbolic links. I searched the forum recommending to use the --force option, but this option has also been deprecated in favor of the --overwrite flag, which does not resolve the issue with your packaging. Can we get an updated package, please?

Which is the correct directory for the config.xml file in Debian 9 please? /etc/pulse/ or /etc/pulseway/ (Agent installed into / etc/pulse/ by default) Below example config isn't working / what must we change? (Agent starts with no errors, but password remains visible and device is not showing up in Pulseway) ============================================== <?xml version="1.0" encoding="utf-8"?> <config xmlns="http://www.pulseway.com/linuxconfig"> <!--Pulseway Linux Monitoring Agent - pulseway.com --> <!--Account Information - Username: *** - Password: *** - UseCustomServer: enable this option only if …

Hi, installed x86_64 pcmonitor service on Centos 6.5 (Xen VPS) but on trying to start the service I am getting [root@vps1 ~]# tail /var/log/messages Dec 31 08:41:15 vps1 pcmonitor: Got exception signal: 11 Dec 31 08:41:15 vps1 kernel: pcmonitord[1224]: segfault at 0 ip 00007f9b089ce312 sp 00007f9b074e0f38 error 4 in libc-2.12.so[7f9b0889a000+18b000] from /var/log/messages. The service appears to start as it says 'ok' on command line but restart shows 'failed' to stop so is not running. [root@vps1 ~]# uname -m x86_64 My config file looks ok I think, I can post it up if you need (obviously xxxx 'ing out the 'sensitive' details) Am I missing some dependencies o…

Hello. I am currently running the linux/java version on my NAS, and it's working good. All I had to do was to build sigar, and copy the libsigar-arm-linux.so to /opt/pcmonitor/native/ I tried the Raspberry PI version, but that's using armhf, and my NAS is arm v5, so no hard float support. Is it possible to rebuild for armel?