Linux

Is it possible to explore mount points on Linux machines like it is on Mac OS machines? With the Linux machines I monitor, I tab on the Hard Disks tab (in iOS app), I can view the mounts and their used/free space, but I can't tap to explore any of them. I can do that for the Mac OS machines I monitor. I don't monitor any Windows machines, but I'm assuming they have that same functionality. Looking over my config file doesn't seem to indicate I missed something, but I'd be happy to be proved wrong.

I am attempting to install pulseway on my raspberry pi 3b+, and have downloaded and installed the correct file from the pulseway website, and made sure that my openssl libraries are up to date and correctly setup. I followed through with the given installation instructions and repeatedly the pulseway service is unable to be started. When executing the command sudo systemctl start pulseway, the command works and presents no errors. Upon checking the app or the list of all services, however, pulseway is not shown as a service and there is no devices connected to the app. See the attached images for the output of sudo systemctl status pulseway

My syslog is full of pulseway trying to execute a command. pulsewayd[3981177]: sh: status: command not found It may be the following command I saw (which doesn't work) sh -c awk -v a="$(awk '/cpu /{print $2+$4,$2+$4+$5}' /proc/stat; sleep 1)" '/cpu /{split(a,b," "); print 100*($2+$4-b[1])/($2+$4+$5-b[2])}' /proc/stat 2>&1 I'm running Fedora 31 kernel 5.5.15-200.fc31.x86_64

Hi team, Pulseway client from my Fedore machine stopped working this mordning out of the blue. I made a clean install, but it didn't help. I'm getting a strage message in /var/log/messages when I strat the clinet systemd[1]: pulseway.service: main process exited, code=killed, status=4 ...and the service status looks like this: pulseway.service - LSB: start and stop pulsewayd Loaded: loaded (/etc/rc.d/init.d/pulseway) Active: active (exited) since Mon, 13 Oct 2014 16:33:34 +0300; 39min ago Main PID: 2984 (code=killed, signal=ILL) CGroup: name=systemd:/system/pulseway.service Basically I did no change on my …

Hello All I have a Pro license for Pulseway currently watching over a PI3 for homebridge, two unRAID server and an unbuntu SFF PC for my PiHole DNS ad blocking, and just recently a Fedora Server 30 VM running on one of the unRAID servers that was working for a couple days when all of a sudden it started crashing a lot and frequently I am kind of stumped, if i manually restart the VM its stable for a while but starts crashing again, I am running kernel 5.3.6-200.fc30.x86_64 as that is the latest my reverse proxy script runs with. the logs are showing core stack dumps like this with different Process ID's of course: Process 22212 (pulsewayd) of user 0 dumped c…

We have a cPanel server using centos7 as based system, all monitors are fine except the hard disks seems can't detect any local drives and always shows "Data not available" as result. We do have other centos7 based system that runs pulseway and can detect all hard disks and mounting points as well. Do we have to enable any service for pulseway to detect the hard disks? Or there is some failure on system? Thank you. P.S. below is the result when runs df -h on the problematic server: Filesystem Size Used Avail Use% Mounted on /dev/mapper/cl-root 50G 19G 32G 37% / devtmpfs 16G 0 1…

can anyone show me how can i connect Pulseway to monitors mysql, and Ruby App ? mysql is on /usr/sbin/mysqld -> <Service Name="mysql" DisplayName="MySql" Path="" StartParameters="" CanBeStopped="false" Enabled="true"/> but what about setting ' IsDaemon="true" DaemonType="UPSTART" ' ? SYSV, UPSTARTD and SYSTEMD ? I have same problem with puma from rails server, its on (unix:///home/test/prod.sock)

By default pulseway reccognizes the systemd services running as root. i want to configure a service which is running as the current user... the service is started using the command "systemctl --user start servicename" the service is placed in the directory "/etc/systemd/user/servicename.service" I have tried using the systemd option in pulseway config, but it is not recognized.

Hi, I'm having a problem to set up a Group (Test, for example) in config.xml. After change file, the server appear in dashboard, but in a "Legacy" group. Wen I edit config.xml again, the group name is replaced to "Legacy" See bellow: Sorry, I don't speak fluently english....

Hi, I previously had PW running on a virtualized instance of Centos 7 using Nginx. For some reason communication was suspended with PW about 25 days ago. Did a chkconfig --list and showed that the agent was installed. pulseway 0:off 1:off 2:off 3:on 4:off 5:on 6:off So, I decided to uninstall and reinstall (64 bit). Reverified that I had the customized XML file inside of /etc/pulseway directory (same one I used before). But I can't figure out how to start PW. Here what I've done: [root@twilight ~]# rpm -ivh http://www.pulseway.com/download/pulseway_x64.rpm Retrieving http://www.pulseway.com/download/pulseway_x64.rpm Preparing...…

I have a couple of webservers (nginx) that I'd like to monitor for any code other than 200. Is there a way for pulseway to do this?

I followed all the steps like instructed. I filled up the config. file with my username and password and saved it. When i try to start pulseway without "sudo" comand it shows: ==== AUTHENTICATING FOR org.freedesktop.systemd1.manage-unit-files === Authentication is required to manage system service or unit files. Authenticating as: root Password: I tried my pi account password, my pulseway password and just leaving the password empty. After that i got: ==== AUTHENTICATION FAILED === Failed to enable unit: Access So i tried to start pulseway with "sudo" and it seems like nothing happend. When i checked the logs i got: ● pulseway.…

Anyone had any luck installing the agent in to a PFsense firewall? Tried with no luck, with my limited linux knowlage.

Hello All, I would like to Install pulseway on a FreeBSD based system. I saw some posts about this topic from way back in 2013; and was just wondering if there had been any more progress on this topic. Thanks!

When installing Pulseway on Debian 10 I get the error message when validating "An error occured while starting the Pulseway service.Please see log for more details" I am not sure where I should be looking for this log. When I monitor the systemctl I get: pulseway.service - Remotely Monitor and Control IT Systems Loaded: loaded (/etc/systemd/system/pulseway.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Tue 2020-06-02 18:45:55 BST; 15s ago Process: 2791 ExecStart=/usr/sbin/pulsewayd --no-daemonize (code=exited, status=1/FAILURE) Main PID: 2791 (code=exited, status=1/FAILURE) Trying systemctl start/res…

Hello, See topic. I can't find a suitable installer? Please advise, thank you!

I recently installed the latest version of Pulseway on my Ubuntu 17.04 server. The service appears to be starting, and I'm not seeing any errors. However, the machine never shows up in the Pulseway app. I feel like I'm missing something simple here. Any advice would be greatly appreciated.

So i'll be honest. I'm the new IT guy trying to get pulseway up and running on a Linux Archive server and having issues. Forgive my ignorance. These are the errors I get when I type - service pulseway status - into terminal any help is hugely appreciated pulseway.service - Remotely Monitor and Control IT Systems Loaded: loaded (/etc/systemd/system/pulseway.service; enabled; vendor preset: Active: failed (Result: exit-code) since Wed 2021-12-01 20:35:55 UTC; 4min 59 Process: 15588 ExecStart=/usr/sbin/pulsewayd --no-daemonize (code=exited, status=1/FAILURE) Main PID: 15588 (code=exited, status=1/FAILURE) Dec 01 20:35:55 mf-server systemd[1]: Started Remotely M…

When installing the pulseway agent on my Debian Version 9.4 X64 proxmox VE 5.2-1 server I get the following. I have restarted the server 3 times now after each install attempt - I can't figure out where the log is located. An error occurred while starting Pulseway service. Please see log for more details. Here is the steps that I did to get started... root@Dell-R610:~# wget https://www.pulseway.com/download/pulseway_x64.deb root@Dell-R610:~# dpkg -i pulseway_x64.deb root@Dell-R610:~# pulseway-registration Would you like to register or unregister the system? [1] Register System [2] Exit Enter selection: 1 Please enter a username: ******** Please ente…

Hi, I'm using Pulseway with Unraid and it's working properly, but I'm getting a lot of these errors that doesn't make sense because I'm always with the internet. Long Story short. This error concerns me. Apr 13 06:55:22 Tower pulseway: Error while registering computer:SOAP 1.1 fault SOAP-ENV:Server[no subcode]#012"Timeout"#012Detail: connect failed in tcp_connect() Apr 13 06:55:53 Tower pulseway: Error while registering computer:SOAP 1.1 fault SOAP-ENV:Server[no subcode]#012"Timeout"#012Detail: connect failed in tcp_connect() Apr 13 06:56:01 Tower pulseway: Error while registering computer:SOAP 1.1 fault SOAP-ENV:Server[no subcode]#012"No route to …

I am running CentOS 6 and I can track most of my /etc/init.d services just fine - except for iptables. When the service is running, Pulseway reports that it is down. For example, these lines work just fine: <Service Name="ntpd" DisplayName="NTPD Service" IsDaemon="true" DaemonType="SYSVINIT" Path="" StartParameters="" CanBeStopped="true" Enabled="true"/> <Service Name="crond" DisplayName="Cron Daemon" IsDaemon="true" DaemonType="SYSVINIT" Path="" StartParameters="" CanBeStopped="true" Enabled="true"/> But this one does not <Service Name="iptables" DisplayName="iptables Service" IsDaemon="true" DaemonType="SYSVINIT" Path="" StartParameters="…

Hello. I am currently running the linux/java version on my NAS, and it's working good. All I had to do was to build sigar, and copy the libsigar-arm-linux.so to /opt/pcmonitor/native/ I tried the Raspberry PI version, but that's using armhf, and my NAS is arm v5, so no hard float support. Is it possible to rebuild for armel?

Hello, I've made a new fresh install on a Raspberry Pi 3. I've followed the instructions of the "Install and Setup Agents / Raspbian" page. As usual. Service does not start correctly. The syslog shows raspberryXyz pulseway[854]: /usr/sbin/pulsewayd: error while loading shared libraries: libssl.so.1.0.0: cannot open shared object file: No such file or directory Any hint to solve this problem? Thanks in advance. Best regards, Guy

I noticed there is an updated 5.3 linux agent today. Is there a changelog for this?

I recently just upgraded my Linux agent to version 4.4. I am now no longer able to able to monitor Linux Services, SSL Certificates or Websites. As I was able to previously, through the use of the following config: <!--Service Monitoring Config--> <!--Add one or more MonitoredService --> <Services> <!--Monitors Upstartd, Systemd or System V services--> <!--For System V init there is a requirement for the script. It has to support start, stop and status arguments and when requesting status it has to report "running"--> <!--Name: the name of the service--> <!--Instance: for Upstartd, if the service has multiple instances here you …