Other

Starting from version 3.9, Pulseway supports file change notifications.

Pulseway allows you to restrict access for Dashboard and Web Application by IP Address so only designated IPs will be able to connect. To add a restriction start Pulseway on a monitored PC and click "Change Account Details". On the account detail you can add IP addresses that are allowed to access either Dashboard or Web App or both.

Pulseway supports Wake on LAN and Wake on WAN over Internet. The mobile application will send a magic packet in LAN while on WiFi. As well, our cloud servers will send the same magic packet to the public IP address on UDP 9 (you can change the port number and assign a different port number for each computer using the Pulseway app installed on your PC, go to System->Wake on WAN over Internet, default is 9). Please make sure that the router forwards those packets in the LAN and that the PC supports Wake on LAN (check BIOS and network interface settings). The only limitation at the moment using Wake on WAN over Internet occurs when our cloud servers have the last p…

Hello! I am new in pulseway, there have some question about the audit report. 1. Can the agent send a daily/weekly/monthly report to my email or mobile phone? (if yes, how to get it work?) 2. For the Linux Server was only able to read the network traffic graph and no audit report found, could someone tell me the reason? i want to convince pulseway to my boss for manage all the server we have, so i have to know how to use pulseway. I hope someone can help me, thanks a lot. Drian

Hi, I want to add the date in the PDF name of a scheduled report. Is there a way enable / do this?

Is it possible to set something within PC monitor to automatically restart a server a specific time or to setup a schedule to do this? I know it can be done through schedule tasks on the server its self and then you can monitor the task, but can it be done from within PC monitor?

It occurs to me that I could monitor for an associated eventlog entry for usb device unplugged to catch a removed mouse or keyboard but wonder if there's a more elegant way. Thanks, Bill

Hello, I apologize if this is a newbie question and is answered somewhere else. I tried various searches on the forum and didn't find the answer. Is there a way to change the default (60 seconds) that the system waits for the user to confirm before starting a remote desktop session? I found the setting where it can be turned off/on, but have not been able to find a number of seconds to wait. Thank you! Rob

Hi Team, Has anyone tried the new feature custom titles? I have tried it with two applications and keep getting "Failed to read metadata". Can anyone help with this? Thank you, Sean Faria

Can someone help explain how AD discovery is supposed to work? I have tried just having it enabled. I have tried specifying the domain. Tried specifying OU's. The only time I see domain services is when the pinging in the same subnet. I just need to get devices installed.

Good afternoon, We have installed quite a few synologies at customers for which I would like to monitor the free space. I tried with SNMP but I am not completely satisfied with it and the notification from SNMP was not made for this. Is there another way to monitor this? SMB share, mapped drives, ..? Thanks in advance! With polite regards, Chris

I am trying to make a default list of all critical event logs that we should monitor and looking for suggestions I have started with ShadowProtect Application Error Event ID: 1121 Monitors SP failed backup

I hope this is the right place to post this. I was looking over the different forms for an answer but was not able to find one, and this topic is related to probably all versions of PC monitor other then enterprise. I currently am running PC Monitor on probably close to 15 windows machines right now and just recently noticed that certain computers are no longer reporting stats or notifications. After looking into it a little further it looks like all machines from that location has stopped connecting to the PC Monitor Server. I have been working with a few of our other IT guys and we thought it could be the firewall but was unable to pinpoint the IP address used to tr…

Good Day, I note that running a report for "Installed Applications" (Reporting -> Templates -> Applications) that the data seems to be outdated. If I confirm the list of applications via the Systems -> All Systems -> "Computer" -> Applications, I see an updated list. I assume there is some "data buffer" which is used by the report which is not updated immediately? Is there not a way, that I can instruct Pulseway to re-evaluate all systems data (Applications in my case) for a specific report run - taking into account that the report will then take some time to run which would be fine? Kind regards, Peter

Hi There all, Is there any way to create an policy for multiple endpoint to notify on any started services? On our schools kids play illegal games and we want to terminate these games when they start them, through pulseway workflows. Herefor we need to see if the service of the game is active. On the computer end we can setup service monitoring but we cannot do this global somehow. Hope someone has an smart idea about this

Hello i´ve been noticied a big use of outbound data from monitored servers. One in case run a simple webserver(webspeed) without connections and i could monitor it in focus. The use of link it´s big only for monitored machines. as you can see on below. #Src IPSrc PortDst IPDst PortProtocolSrc IfaceDst IfaceFlow TypeIPS CategoryExpiry (sec)Tx BytesRx BytesTx PktsRx PktsFlush110.0.1.41828969.191.244.2218292TCPX0X1 N/A89917738287101042490328617565791210.0.0.1635060172.30.1.1065060UDPX0X1SIP ControlN/A29163727930445590310.0.0.155406169.65.50.4443TCPX0X1HTTPSN/A89613574159122795882385433905410.0.0.235203469.65.50.5443TCPX0X1HTTPSN/A897988890779919233291832225510.0.0.17470569.…

Hi, I use MySQL on PC locally. I want to be able to manage and see my tables using Pulseway but I don't know how to set it up for it. Is there any thing I need to get from the MySQL dashboard?

Hey forum, We're experiencing some trouble using the HTTP-GET feature. Our old monitoring system (Nagios) is able to monitor the availability of web sites, more specifically login pages for access points, perfectly well. However, when using Pulseway it gives a notification when it reaches the AP because it has HTTP basic authentication. This is not a problem, if we get that response we know that it is reachable. This should not be seen as a problem and should not give a notification? Could you fix this? Is there a workaround at the moment? - Jaapyse

Hello, I recently installed the PC Monitor app on a Microsoft Surface (Windows RT) device, and the PC Monitor Manager software onto our backup server. I'm quite impressed with the capabilities of this application! It is quite nice to see, in real-time, the various stats of the server, especially on the Surface. Remote management is a snap! One area I am curious about is integration with Microsoft System Center: Data Protection Manager. I doubt I would see such integration any time soon. But is it even possible? As a backup administrator, I'm regularly connecting to the server and checking on backup job status, data source protection, the amount of space available in…

Hi, I'm currently setting up a custom SQL notification query and I'm running in to issues: I am able to test my connection under the "Server Modules > SQL Server" tab, with a user that was created on the SQL Server I am also able to run my query when I press "Executy query". Yet, as soon as this query in ran in the background, I get an error: "SQL Filter MyFilterName has failed to execute in SQL Server on the computer ‘MyComputerName’ in group 'Default'Error Message: The server principal "NT AUTHORITY\SYSTEM" is not able to access the database "myDbName" under the current security context. " It seems like Pulseway insist on using…

Hello, Is there a way to monitor an Asterisk instance on a Linux server? Best regards, Guy

We use GFI MailEssentials for our anti-spam system, and we're having problems with the internal queues growing to a point where the system stops working. Does anyone know of a way to monitor the size of specific queues within Windows Message Queueing and of course notify at a given level. Please, no replies about our choice of anti-spam system...!

Hi, I am new to PC Monitor, but it look to me that it is only possible to add management of one SQL Server instance pr. computer. Is that right? And if so ... is support for multiple instances on the list of upcoming futures? It would be very nice, because we have several servers with multiple SQL instances. Best Regards, Martin Stevnhoved Abakion A/S.

Can anyone find the new in 8.5 feature "Network Monitoring" or know how to add a device?

I am not able to add to Notes in any of the apps. (Web, IOS)