Jump to content

Restrict access for Dashboard and Web App by IP address

Recommended Posts

  • Administrators

Pulseway allows you to restrict access for Dashboard and Web Application by IP Address so only designated IPs will be able to connect.

To add a restriction start Pulseway on a monitored PC and click "Change Account Details".
On the account detail you can add IP addresses that are allowed to access either Dashboard or Web App or both.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Marius
      Pulseway supports Wake on LAN and Wake on WAN over Internet.

      The mobile application will send a magic packet in LAN while on WiFi.
      As well, our cloud servers will send the same magic packet to the public IP address on UDP 9 (you can change the port number and assign a different port number for each computer using the Pulseway app installed on your PC, go to System->Wake on WAN over Internet, default is 9).

      Please make sure that the router forwards those packets in the LAN and that the PC supports Wake on LAN (check BIOS and network interface settings).

      The only limitation at the moment using Wake on WAN over Internet occurs when our cloud servers have the last public IP used by your computer and your public IP changes. The magic packet will be sent to the last known public IP and will fail to wake the computer. We are planning to solve this problem in the future using a different method.
  • Create New...