General

i have bios setting on and port forwarded udp 9 to the address and have ethernet setting to wake from lan on but still cant wake pc. i even tried wake me on lan program so im not sure what ive missed to get this to work.

Hi people: Recently the business laptop (core i7 8th gen, 16 GB RAM, 512 SSD (CT1000P5SSD8)) got pulseway installed. But the laptop began to get lagged and the fans working more and noisily. So my question is: is this behavior normal? or is a bug? In case of bug; have plans to iron it?

I'm new to Pulseway, so forgive me if this question doesn't warrant a forum post.. When setting up patch policies, Office 2019 and Office pro plus are there listed underneath the third part apps to update, What can I do to get Office 2016 listed there that way all of our Office products are being updated.

Is it possible to exclude all the redirected printers that show up in a terminal server when looking at the printers? This can create a huge list of printers that one must look at.

Server is showing version 8.4.0, but we don't have a change log. What has changed in the newest version?

Dear Pulseway Support, In the Windows policy we have enabled a couple of events (e.g. To detect if someone has unlocked Windows - EventID 4801). However, now we would like to forward it through Pulseway, but it doesn't seem to be triggered at all while they are being displayed in the Security Windows log... The following has been configured in Pulseway (Event Log Filter): Event Log: Security Level: Information, Audit Success Event IDs: 4801 Notification Priority: Critical And on top of that, would it be possible to forward this notification via an email? Because this feature has not been supported anymore from Windows it…

Hej, I have installed the pulseway agent in my Raspberry Pi rel 4. However I can only sent commands via terminal and I want to see the remote screen connected with GUI. How can I achieve that. I could only find information on how to setup the agent but nothing about a remote desktop connection to a raspberry pi.

We recently purchased Pulseway for our organization, and we are looking to maximize its potential, particularly in utilizing the Client Service Portal. Could you provide us with examples or guidance on how to effectively use the Client Service Portal? Our goal is to enable users to solve basic problems on their own. Any documentation, tutorials, or best practices you can share would be greatly appreciated. Thank you for your assistance.

Pulseway seems to be down currently? Any ETA on when it will be back up?

Hi there, This might be a bit of a long shot - but I have an end client who's interested in deploying custom Teams issues with Pulseway (as there aren't many users in-office for obvious reasons). I've attempted to deploy this by pushing a batch script, to copy the backgrounds from a shared location. The backgrounds folder in question is located in the user's roaming appdata (%appdata%\Microsoft\Teams\Backgrounds\Uploads). For this reason I wasn't able to use %username% correctly in my batch script, as the script is being run by some Pulseway service, rather than as the local user account. Please let me know if you've any ideas and have a great day. …

Good night all, I want to sign up for the trial of pulseway, but i am not seeing my country in the drop down for country listing. I live in Trinidad and Tobago, which is in the caribbean. Is there anyway around this ? if i choose another country from the list, will there be a billing issue when i try to use my CC to pay for the service ?

Hello, Look like your service are down ? We are blind now, we didn't receive any supervision events from our infrastructure. Trying to log on your backend, an error occure " Database Query Exception" on the login panel ⚠ Thanks for any update.

a simple question. to manage our systems we use group policies for notifying us about general things (high cpu, windows update etc etc.) Does Pulseway prioritize the agent group policy or the settings made on the local agent of the system? for example: we have a customer with a couple systems with high CPU usage, we dont want to receive an notification for this, so i disabled it in the group policy but i still get a warning that computer X uses more then an X amount of cpu for a certain duration, i checked the agent settings localy and i see that it was still checked there that when the system has high cpu usage to send us a notification.

After we stop Pulseway service either via Services-Stop or with PowerShell, a minute a two later the service starts running again. Why does it start again and how can we avoid that?

We recently started trialing Pulseway, hosting it on our own platform. We use Cloudflare for DNS. If you haven't used Cloudflare, it basically uses caching and proxy technology. Obviously, with Pulseway, you can't do that. So we disabled the proxy route (for now). Cloudflare has the ability to create rules to bypass the proxy/caching features, but still provide security. Has anyone used Cloudflare before, and has anyone used it in front of a Pulseway Server? If not, my thought is if anyone is interested in working on this together, we could. Employing Cloudflare's security could be a huge benefit for security, and the best part, most if not all of it would …

I have pulseway set to send me a notification for critical updates. Normally windows defender definition updates would not fall under this. Over the past couple days I have started to get notifications for when these are released, which is many times a day. Is this a bug that these are now considered critical? If not a bug and is something new and intentional is there any way to exclude these?

I have both Mac and PC endpoints. Is there a way to get a count by operating system?

Hi, Years ago when I first setup Pulseway there was an issue highlighted on the forums with servers and hard disk monitoring. It was advised at the time that you should disable this feature otherwise the HDD will get hammered with requests. I cant remember the actual reason in the forum post, but wondered if there we still known issues with having this enabled on production servers?

Hi there and sorry if this has been brought up before but I can't seem to find any answer. So I'm really just wanting to be able to see what "Applications" are being used on remote PC's I can see "Processes" but there are usually SO many! Is there any way Pulseway can be configured to show "Applications" open and how would I do that? It seems like Pulseway can report so much other information this should be something quite straight forward? Many thanks in advance for any help you can provide. Cheers Andrew

Hi We would like to pull a report or see a list of systems that are falling under the xx/xx of RMM Server licenses and xx/xx of RMM Workstation Licenses. Is there anyway to do this??

Is there a way to easily check which tasks and scripts have ran for the past xx days with its status for a particular machine? I would have expected to find it when selecting the machine amongst all the other information Instead we have to go to Tasks , and then Execution History, but it is per task, and there could be hundred of executions for that task, and we need to open then one by one to find the desired machine. Not easy Basically, very quickly, we want to check what has ran or not, and if the tasks were successful Thanks

Is there a way to be alerted to GPU hardware changes? We have had a few clients who have Nvidia 3080s and other high end cards stolen and replaced with onboard video or lower end cards. We would like to be notified for these hardware changes via an alert. I know Pulseway is able to set up custom alerts, I just don't know what we need to do to make this happen. From what I read on Google, Windows tracks this in the System log?

Hi there, This has been happening for a few months but been getting alerts for a Windows Update Pending file operation which requires a reboot to complete, that I don’t seem to be able to clear, as soon as I restart, clear notifications and it returns immediately. I do want to be getting reboot required notifications if windows updates needs it but even if I log onto the machine and manually check windows updates there is no need for a reboot.

I can add endpoints, but if I try to reduce the number I get an error: You are currently using x endpoints, you need to remove an endpoint before you can decrease the order quantity I am over licenced by 2 endpoints, so would like this changed to reduce my bill. I emailed my rep as I wanted to do this last month but did not hear back.

Is there a way to install via login script and have it install silently? Also, can I install NOT using PowerShell?