Linux

Hi I am not able to install the agent on a ubuntu server. Under is the log from the installation root@ubuntuserver:/home/pc/pulseway# sudo dpkg -i pulseway_x86.deb pulseway_x86.deb Selecting previously unselected package pulseway. (Reading database ... 535339 files and directories currently installed.) Preparing to unpack pulseway_x86.deb ... Stopping pulseway service done Unpacking pulseway (4.7.2) ... Preparing to unpack pulseway_x86.deb ... Stopping pulseway service done Unpacking pulseway (4.7.2) over (4.7.2) ... More than one copy of package pulseway has been unpacked in this run ! Only configuring it once. Setting up pulseway (4.7.2) ... Adding system start…

On my two home Ubuntu 12.04 boxes (VMs under esxi 5.1), the agent runs great. (Also seeing the issue on these servers as well, see post below) On the server I lease, I cant get it to stay alive. I am seeing these errors: user@server:/var/log$ sudo cat syslog | grep pcmonitor Jan 13 22:38:51 server pcmonitor: *** glibc detected *** /usr/sbin/pcmonitord: double free or corruption (fasttop): 0x0000000000d07ea0 *** Jan 13 22:40:03 server pcmonitor: Error while registering computer:Empty response user@server:/var/log$ date Mon Jan 13 22:42:45 EST 2014 user@server:/var/log$ sudo cat syslog.1 | grep pcmonitor Jan 12 13:21:47 server pcmonitor: Received request Resume…

Hi Wondering if anyone has managed to get one of the UNIX/Linux agents to install on one of these NAS units? The RPM install looks like it should work but rpm errors with no gzip installed. Looks like it may need a custom agent package created in .APK to suit Asustor ADM v2 Cheers

Hi I've been using Pulseway on Windows for some time now and it's great. I now have a Raspberry Pi that I'm using to run my Domoticz home automation system, and want to use Pulseway to monitor that too. I have Pulseway installed on the Pi and it's working fine, but I can't quite figure out how to setup monitoring of the Domoticz process correctly. The Domoticz service is started using the command: sudo service domoticz.sh start The process it runs is (from a ps -ef ): /domoticz/domoticz -daemon -www 8089 -log /domoticz/domoticz.log I've set this up in the config.xml, but am not entirely sure what to put for the following parameters: IsDaemon - NONE, SYSVINIT, U…

How do I remove the 64bit agent from my linux vps server/host? I sucessfully installed it a couple months ago and its working fine, but I am going a different route now and need to remove it but I can't figure out how. Please advise. Thanks

Hi all, We would like to monitor several email-servers. Is there a way to monitor blacklists entries for these server like https://github.com/egeland/nagios-rbl-check ? Thanks in advance and best regards Reto

Hi, It seemed to be working until the 13th Oct (was it auto-upgraded? - the config.xml.sample has the same datestamp as the first failure. the 'my account' 'monitored systems' shows it last logged in as 4.5.3 ) Now I can't get beyond: pulseway: Configuration read successfully! pulseway: Got exception signal: 4 Originally this happened with the existing config.xml. I copied the config.xml.sample, added in my Account details and gradually changed "true"s to "false"s I can connect using the rest api I can't seem to find any clue as to what signal 4 is? Is there a debug option? Thanks,

I am testing PC Monitor out on my home network. Everything is going well, except I cannot seem to get stats for eth0 on my Linux machines. All other data (CPU, Disk, etc) is showing just fine for the two Ubuntu 12.04 systems, only network data is absent. I followed the install guide from this forum and edited the config file appropriately (I think). What am I doing wrong? Can anyone confirm they get network data on Ubuntu 12.04? My config and ifconfig output are below. Thanks, Brian My config.xml: <config xmlns="http://www.pulseway.com/linuxconfig"> <!--Account Information--> <!--Username: Your Mobile PC Monitor username--> <!--Passw…

Hey folks I have configured PC Monitor on my MacBook Pro, Ubuntu 12.04 and iPhone. I can monitor hardware stats like CPU Temperature from my MacBook Pro with my iPhone without any problems. When I try to monitor the temperature from my Linux Machine, I fail. What do I have to add in the config.xml to monitor the linux temps? Is this feature supported from PC Monitor? If not, are there some plans to add this feature in the near future? Thanks for help

When I try to run the upgrade I get??? rpmlib(PayloadIsLzma) <= 4.4.6-1 is needed by pulseway-4.5.4-2.x86_64 Can anyone point me to 4.4.6-1 download or point me in the right direction? Thanks!

I have a couple of webservers (nginx) that I'd like to monitor for any code other than 200. Is there a way for pulseway to do this?

Hi there, I have looked through the whole config file and can't seem to find where to enable the notifications for user log on actions is there something I am missing? It was in the previous version and it is something quite useful to me, if it is still there can you give me the command to re add it into my config file please?

Hi..! We have multiple Debian Linux installations, but suddently Pulseway stopped working.. root@Marine-RPS:~# /etc/init.d/pulseway start /usr/sbin/pulsewayd: error while loading shared libraries: libidn.so.11: cannot open shared object file: No such file or directory What happend since yesterday? - Has there been an automatic update or something on pulseway? //Dennis

Is there a way i can disable the notification of a single service in my list but leave notifications for other services?

Hi team, Pulseway client from my Fedore machine stopped working this mordning out of the blue. I made a clean install, but it didn't help. I'm getting a strage message in /var/log/messages when I strat the clinet systemd[1]: pulseway.service: main process exited, code=killed, status=4 ...and the service status looks like this: pulseway.service - LSB: start and stop pulsewayd Loaded: loaded (/etc/rc.d/init.d/pulseway) Active: active (exited) since Mon, 13 Oct 2014 16:33:34 +0300; 39min ago Main PID: 2984 (code=killed, signal=ILL) CGroup: name=systemd:/system/pulseway.service Basically I did no change on my …

Hi, I installed pulseway in my linux, configured everything and installed also in my iPhone / iPad. Everything works great except WOL, I'm using local network so I don't need to forward ports in my router, and with the same hardware I can WOL using another programs for iOS, but I want to use Pulseway for everything. It's strange, I don't get it, need your help. Thanks

Hey, I use PCmonitor, I mean now is Pulseway (terrible name btw ) for 2 years ? More less. I had only one time configure config and it was on fedora 17 , config of PCmonitor. I had to make clean install of Fedora 20 so it's about time to reinstall old PCmonitor to pulseway. So I did. It should be easy but.. I quess it's not. I configure whole config, add username and password usually stuff, started the service systemctl start pulseway.service chkconfig pulseway on .. and? Nothing. I don't see my computer in my account any of my smartphone.. what could be the problem?

Hi there, I've running pulseway for several month, but now I experienced some problems. When I start the pulseway service, I get the following error in syslog: kernel: [57666.481308] traps: pulsewayd[4301] trap stack segment ip:483fab sp:7fff44b05e50 THX for help in advance!

I recently just upgraded my Linux agent to version 4.4. I am now no longer able to able to monitor Linux Services, SSL Certificates or Websites. As I was able to previously, through the use of the following config: <!--Service Monitoring Config--> <!--Add one or more MonitoredService --> <Services> <!--Monitors Upstartd, Systemd or System V services--> <!--For System V init there is a requirement for the script. It has to support start, stop and status arguments and when requesting status it has to report "running"--> <!--Name: the name of the service--> <!--Instance: for Upstartd, if the service has multiple instances here you …

Hi, I have Centos Linux agent with currently running with no issue, I can define the computer name which display on the mobile app on windows agent but linux agent will use the hostname on the system, is that a way to manual configure that.

Hello All, This morning I discovered Pulseway. This product might be the solution to a number of "issues" I have. I have a home media server running Ubuntu 12.0, along with a Win 8.1 laptop and a Win 7 desktop. I've successfully installed agents on all three. In my linux server, I have a total of one system disk and three data disks. All four appear when I access the server in the "mypulseway.com" web browser. However in the Windows 8 application, it only shows one of the three data disks. Is there any way to correct this?

Is there a way to install pc monitor on Raspberry Pi running Openelec? I can connect to the Raspberry pi via ssh but commands are limited. There’s no dpkg command nor does apt-get work. Best option of course would be a normal xbmc add-on support. Would that be possible?

Is there an option in config.xml that allows us to turn off access to the terminal? Or I'd just like a "read only" set up if possible?

Greetings...I have installed and configured the pcmonitor service and config file as per instructions and when I start the service all looks well but when I type in status command I get root@raspberrypi:~# /etc/init.d/pcmonitor status [FAIL] pcmonitor is not running ... failed! But when I type in restart command it look good root@raspberrypi:~# /etc/init.d/pcmonitor restart [ ok ] Restarting pcmonitor: pcmonitor. I do not see the system listed obviously on my account. Any help would be appreciated

Hi Pulseway, Why when i try to start the monitor on centos6 that rep me that -bash: I have alredy installed the RPM file and modified the config.xml.sample that i renamed to config.xml Command : CentOS6 rep: Can anyone help me ?