Linux

I was deploying the agents to a very large amount of linux clients (various flavours), we have a chef infrastructure in place so decided to leverage this. I have created a cookbook that gets the latest download .deb or .rpm and install it and configures the config.xml. You can use chef to set all the various options via attributes. feel free to use https://github.com/py-man/chef-pcmonitor and modify. cheers

Does this section mean it will monitor access to google on port 80? What I really need is to monitor 25/SMTP on the system and be notified if it goes down. <MonitoredPorts> <!--Type - port's type (TCP or UDP)--> <!--Number- port's number--> <!--Name- port's name --> <!--Name- port's address (only applicable if port type is TCP)--> <Port Type="TCP" Number="80" Name="80" Address="www.google.com"/> Ta!

I've been noticing some issues with pcmonitor either failing to start or crashing on my router. Linux i686 2.6.32-5-untangle-686 I'm not sure exactly what is causing this, all the windows clients are great. For some reason the process will either just die or sometimes it won't start with the computer. Untangle NG is a firewall distro that is based on debian.

I recently just upgraded my Linux agent to version 4.4. I am now no longer able to able to monitor Linux Services, SSL Certificates or Websites. As I was able to previously, through the use of the following config: <!--Service Monitoring Config--> <!--Add one or more MonitoredService --> <Services> <!--Monitors Upstartd, Systemd or System V services--> <!--For System V init there is a requirement for the script. It has to support start, stop and status arguments and when requesting status it has to report "running"--> <!--Name: the name of the service--> <!--Instance: for Upstartd, if the service has multiple instances here you …

Is there a way i can disable the notification of a single service in my list but leave notifications for other services?

I have a couple of webservers (nginx) that I'd like to monitor for any code other than 200. Is there a way for pulseway to do this?

How do I remove the 64bit agent from my linux vps server/host? I sucessfully installed it a couple months ago and its working fine, but I am going a different route now and need to remove it but I can't figure out how. Please advise. Thanks

Hi I've been using Pulseway on Windows for some time now and it's great. I now have a Raspberry Pi that I'm using to run my Domoticz home automation system, and want to use Pulseway to monitor that too. I have Pulseway installed on the Pi and it's working fine, but I can't quite figure out how to setup monitoring of the Domoticz process correctly. The Domoticz service is started using the command: sudo service domoticz.sh start The process it runs is (from a ps -ef ): /domoticz/domoticz -daemon -www 8089 -log /domoticz/domoticz.log I've set this up in the config.xml, but am not entirely sure what to put for the following parameters: IsDaemon - NONE, SYSVINIT, U…

Hi I am not able to install the agent on a ubuntu server. Under is the log from the installation root@ubuntuserver:/home/pc/pulseway# sudo dpkg -i pulseway_x86.deb pulseway_x86.deb Selecting previously unselected package pulseway. (Reading database ... 535339 files and directories currently installed.) Preparing to unpack pulseway_x86.deb ... Stopping pulseway service done Unpacking pulseway (4.7.2) ... Preparing to unpack pulseway_x86.deb ... Stopping pulseway service done Unpacking pulseway (4.7.2) over (4.7.2) ... More than one copy of package pulseway has been unpacked in this run ! Only configuring it once. Setting up pulseway (4.7.2) ... Adding system start…

Hi, I previously had PW running on a virtualized instance of Centos 7 using Nginx. For some reason communication was suspended with PW about 25 days ago. Did a chkconfig --list and showed that the agent was installed. pulseway 0:off 1:off 2:off 3:on 4:off 5:on 6:off So, I decided to uninstall and reinstall (64 bit). Reverified that I had the customized XML file inside of /etc/pulseway directory (same one I used before). But I can't figure out how to start PW. Here what I've done: [root@twilight ~]# rpm -ivh http://www.pulseway.com/download/pulseway_x64.rpm Retrieving http://www.pulseway.com/download/pulseway_x64.rpm Preparing...…

What would be the best practice for installing the agent on a virtual Linux machine where I don't have root access? The server is managed at/by cloudways.com Their support is phenomenal, I can always direct them to install for me (but then I would have to give them my account password) For the most part I would just need to monitor a running instance of Laravel (web framework) on Apache and MySQL (i saw MySQL monitoring is currently in the works) Would the API be a better solution for this case? Any thoughts appreciated.

Hey there, Is there a way to execute a remote command on multiple systems at once for Linux or even Windows systems? Tim

Hi, We got a linux (Ubuntu) System with some mounted drives form a Synology NAS. The Server has UniFi Video from Ubiquiti installed. This depends on the mount point /media/NVR as mount point. When the NAS goes down or there is an other issue where the mounted drive could not be mounted lets say on startup. I would like to receive a notification of that. How can i integrate this with Pulseway on Linux? The OS drive is not more than 30 Gb. So i could say if /media/NVR has less than 30GB of free Space I want to get a notification. But I cannot figure out how to set this up, who has done this, or knows how its done?

I have a couple of Red Hat servers that are still on 5.11. Is there any way to get a pulseway rpm that will work on this version?

Jan 7 08:33:12 hqv pulseway: Error while registering computer:SOAP 1.1 fault SOAP-ENV:Server[no subcode]#012"Timeout"#012Detail: connect failed in tcp_connect() Jan 7 08:33:43 hqv pulseway: Error while registering computer:SOAP 1.1 fault SOAP-ENV:Server[no subcode]#012"Timeout"#012Detail: connect failed in tcp_connect() Jan 7 08:34:14 hqv pulseway: Error while registering computer:SOAP 1.1 fault SOAP-ENV:Server[no subcode]#012"Timeout"#012Detail: connect failed in tcp_connect() Jan 7 08:34:45 hqv pulseway: Error while registering computer:SOAP 1.1 fault SOAP-ENV:Server[no subcode]#012"Timeout"#012Detail: connect failed in tcp_connect() Hi, A fairly reliable co…

Hi I run Domoticz on a Raspberry Pi and have this successfully being monitored by Pulseway. I am now also using the BA-Bridge software which runs as a java process. Can anyone tell me how to configure Pulseway to monitor this and be able to re-start it if it should fail? The process is started by having /etc/rc.local call a script that does this: nohup java -jar -Dserver.port=8090 -Dconfig.file=/home/pi/habridge/habridge.config /home/pi/habridge/ha-bridge-3.5.1.jar > /home/pi/habridge/habridge-log.txt 2>&1 & Thanks

I have two drives connected to a single Odroid-XU4 server running a linux OS. In the monitor I would like to name these drives so that I can quickly know which is which.

# rpm -i pulseway_x64.rpm error: Failed dependencies: rpmlib(PayloadIsLzma) <= 4.4.6-1 is needed by pulseway-5.1.2-1.x86_64 # uname -m i686 # cat /etc/redhat-release CentOS release 5.11 (Final) please advice asap ...

I noticed there is an updated 5.3 linux agent today. Is there a changelog for this?

We recently noticed a problem with our Pulseway notifications, on one of our Linux servers that is running Cassandra. The Cassandra service had been put into the following state: Active: active (excited), unfortunately we never received notification about the excited state. I did some testing and when I manually stop the service, it shows Active: inactive (dead), I do get notifications. I am at a lose as to why I get notifications when inactive (dead) but not when it is Active (excited). This is the current configuration: <Service Name="cassandra" DisplayName="cassandra" IsDaemon="true" DaemonType="SYSTEMD" Path="" StartParameters="" CanBeStopped="true" En…

Is there a way of making new notification in the WebApp. I see in the configuration file in my linux machine there is notification rules, but it will be nice if I can change them in the webapp? PS Also I have noticed that I do not have in the WebApp menu Server Admin? I have only System from I can see my 2 machines?

I am running CentOS Linux release 7.4.1708 (Core) and have just installed the latest agent. The base config is done and it is visible in the console, but only to the master account (the one whose credentials are added to the config file). How do I make the system visible for all users so that they may all receive alerts and see the status of the box in the dashboard and mobile app? In Windows this is easy, but I see no way to do the same thing in the Linux config. Thanks.

We would like to be able to notify on both successful and failed logins on Linux. (Specifically Ubuntu) We see that there is a property in config.xml called "UserLogsIn" and this is exactly what we want to notify on when there is a login. What I have not found is a way to notify on a failed login. Is there a way to notify for failed Logins? If not, is there a way to notify based on the text "FAILED LOGIN" being added to auth.log? Any help would be appreciated.

Hello, I've juste rebooted a Centos7 server. After the reboot, the Pulseway service is crashed : Aug 27 22:54:12 linuxopenvpn pulseway: Could not get server info SOAP 1.1 fault SOAP-ENV:Server[no subcode]#012"No Data"#012Detail: get host by name failed in tcp_connect() Aug 27 22:54:12 linuxopenvpn pulseway: Could not get existing notifications: SOAP 1.1 fault SOAP-ENV:Server[no subcode]#012"No Data"#012Detail: get host by name failed in tcp_connect() Aug 27 22:54:12 linuxopenvpn pulseway: Last error getting group policy SOAP 1.1 fault SOAP-ENV:Server[no subcode]#012"No Data"#012Detail: get host by name failed in tcp_connect() Aug 27 22:54:15 linuxopenvpn p…

When installing the pulseway agent on my Debian Version 9.4 X64 proxmox VE 5.2-1 server I get the following. I have restarted the server 3 times now after each install attempt - I can't figure out where the log is located. An error occurred while starting Pulseway service. Please see log for more details. Here is the steps that I did to get started... root@Dell-R610:~# wget https://www.pulseway.com/download/pulseway_x64.deb root@Dell-R610:~# dpkg -i pulseway_x64.deb root@Dell-R610:~# pulseway-registration Would you like to register or unregister the system? [1] Register System [2] Exit Enter selection: 1 Please enter a username: ******** Please ente…