Jump to content

Null Value needed


Recommended Posts

I want to setup a SNMP notification for my canon printer.  The "printer status" OID will show nothing when the printer is working and show a number if there is an error. I have no idea what each and every error might show up as. 

Is it possible to set the notification to alert me if that SNMP option changed from null to some number? Right now if I leave "value" blank I cannot click ok to finish. 

Link to post
Share on other sites
  • Staff

Hi @unfeomateo,

If you have selected an MIB Oid variable for monitoring, then this variable has some values at any time (please check the documentation for the printer which are you trying to monitor), therefore you will need configure the condition for that variable which is true only when certain events occur. For more details about this please check out the following article.

 

Link to post
Share on other sites

No values when things are fine. 0 documentation on what might show up if there is an error. So I need to know if any value shows up. For other notifications, I need it to alert me if a value is below 5. I do not see a less than option. 

NM on the less than thing. I see I can make it an integer. 

Edited by unfeomateo
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By OnsiteITservices
      Using USB external hard drive as backup devices and each drive can be recognized if manually added to the notifications/storage screen but I need to know if there is a way to set this to be automatic when the drive is replaced either daily or weekly.  Also, where would this be set globally for are servers being monitored. Currently have 8.6.8.
       
      Thank you,
      Todd Kollars
      Onsite IT Services
    • By Canadian Dental Services
      Hi all,
      I recently did a clean upgrade to Windows 10 on 2 WKSTs previously running Windows 7 with Pulseway installed.  I am now at a loss as to how to re-add these units to my Pulseway instance.
      I see they are still showing up in the “Deployment Successful” tab under “Discovery & Deployment”.
      Is there a way to re-add these units without manually installing the Pulseway app on these WKSTs?
    • By RingTailedLemur7
      Hello, I have a question about the Pulseway app. When the pc is on all of the commands work great and are perfect for managing the pc. But I am attempting to turn on my pc when I am away from my home and then be able to fully control it like I was there. The issue is how the wake up command from sleep or from powered down will not work even when on my home network. How can I fix this. Also a side question, is there a way I would be able to see a live view of the screen or does it only allow screenshots of the screen. Thanks
    • By DQuiram
      We reinstalled Pulseway on a re-imaged system and after the install we noticed issues. In the patch mgmt section, the status was "assign failed" in red. We rebooted the system and then the service was not starting. We checked the service, it was set to start automatically and in the event log it was generating this error: "Service cannot be started.  The handle is invalid"  We removed the system from Pulseway, uninstalled, and reinstalled. Service is starting normally, but still getting the same issue of the patch policy failing to assign. I tried moving the system to another group that did not have a patch policy at all and got the same result. 
    • By Brant
      I've implemented a script that retrieves and stores the Windows Build Version number to a custom field in the system overview.   It works fine on MOST systems.  However, there are a small number systems that are unable to run the script.  The error message displayed includes: Start-Process : This command cannot be run due to the error: The system cannot find the file specified.
      I used the "Insert Output Variable Code" in the script and verified that it includes the inserted text "Start-Process -FilePath "$env:PWY_HOME\CLI.exe" -ArgumentList ("setVariable  .....".
      For some reason, a few systems do not seem to have the environment variable PWY_HOME set.
      It appears that these systems are using the Enable PowerShell User Impersonation option under Pulseway Manger > Settings > Runtime.
      What is the easiest way to make sure that all of my systems have the PWY_HOME variable set so that any future scripts will not fail because of a missing environment variable?
      Thanks,
      Brant
×
×
  • Create New...