Linux

Hello there! I had three Linux systems monitored and everything worked fine untill yesterday. Then one raspbian was reported offline around noon, other some time later, and when I booted old laptop with Debian it reported coming online on my iphone, only to go offline few minutes after that. All machines were online all the time, only pcmonitor service stopped working and can not be started. Funny thing is that when I start it again it appears to actually work for few seconds before dying again. I can see that because iphone app says that system went offline few seconds ago. Besides that I montiror one Windows 7 PC and I have no problems with that. I haven…

Hey folks I have configured PC Monitor on my MacBook Pro, Ubuntu 12.04 and iPhone. I can monitor hardware stats like CPU Temperature from my MacBook Pro with my iPhone without any problems. When I try to monitor the temperature from my Linux Machine, I fail. What do I have to add in the config.xml to monitor the linux temps? Is this feature supported from PC Monitor? If not, are there some plans to add this feature in the near future? Thanks for help

Hi! Some of our newer native Linux client are having trouble registering with our server. Seems identical to jmcclane's Raspberry Pi problem (http://forum.pulseway.com/topic/1065-raspberry-pi-problem/). /var/log/warn shows: Feb 13 14:14:37 linux-ue2u pcmonitor: Error while registering computer:SOAP 1.1 fault: SOAP-ENV:Client[no subcode] "SSL_ERROR_SSL error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed" Detail: SSL_connect error in tcp_connect() uname -a: Linux linux-ue2u 3.11.6-4-default #1 SMP Wed Oct 30 18:04:56 UTC 2013 (e6d4a27) i686 i686 i386 GNU/Linux (openSUSE 13.1) Outputs to commands Calin requested from …

I have followed all your instructions on your sites but I still seem to be struggling with regards to getting this to install properly I follow the instructions on how to remove and install via manual upgrade I get the below message when I try and kill the process after removing via dkpg When I re-install it installs to /etc/pcmonitor but the only files in there are config.xml and config.xml.sample Is there something I am missing?

Hi, is there any way to stop spamming the syslog with this frequent message: "pcmonitor: Publish will sleep for: 16" Thanks, Csaba

Is there a way to have the service auto start in linux? anyone try this? I am running fedora . .

Can't get the service to start, logs are showing Mar 13 13:55:17 raspberrypi pcmonitor: Configuration: expected ' or "

Hi, My current system has the following setup:- OS: CENTOS 6.5 x86_64 standard Control Panel: WHM 11.42.0 (build 23) System Type: Dedicated I was using a very old PC Monitor 2.0 installation on my system which was working fine but today i uninstalled older version and installed the latest PC Monitor 4.3 and after that my server is having reboot problem. When i select RESTART from pc monitor application on my cellphone it starts to show my server as offline after few seconds in the application. WHM/CPanel also stop working and all websites on the server also go offline. But the server is still online and i can ping it continously. It remains in that state until…

Is there an option in config.xml that allows us to turn off access to the terminal? Or I'd just like a "read only" set up if possible?

Hi, I love the pc monitor for my windows servers. But I also have a Suse Linux Enterprise Server 10. In the download section there is a .rpm file for Suse 11 Sp3. Will there be a package available for Suse 10?

Hi, I have Centos Linux agent with currently running with no issue, I can define the computer name which display on the mobile app on windows agent but linux agent will use the hostname on the system, is that a way to manual configure that.

Hi, I installed pulseway in my linux, configured everything and installed also in my iPhone / iPad. Everything works great except WOL, I'm using local network so I don't need to forward ports in my router, and with the same hardware I can WOL using another programs for iOS, but I want to use Pulseway for everything. It's strange, I don't get it, need your help. Thanks

Hi all, We would like to monitor several email-servers. Is there a way to monitor blacklists entries for these server like https://github.com/egeland/nagios-rbl-check ? Thanks in advance and best regards Reto

In order to upgrade to the latest version of Pulseway, I'm following the removal instructions for the old version as per this thread: http://forum.pulseway.com/topic/1079-linux-agent-manual-upgrade/ after running the command "dpkg --remove pcmonitor" It outputs "dpkg: warning: there's no installed package matching pcmonitor" Am I missing something? Its been ages since I've install this into my Ubuntu 12.04 server so I'm not sure how I actually installed it. There doesn't seem to be any entry relating to "pcmonitor" under synaptec either. However I can still see everything going on within the app on my Android phone. The app still responds and notifies…

Hey all, Recently installed Pulseway on various machines to get our monitoring up and running. Everything has worked out so far with the exception of Linux services. I saw some past posts about them not working at one point, but a follow up thread seemed to indicate they should be expected to work now. In my case, I'm running PostFix for mail, and I have included this line in my config.xml: <Service Name="postfix" DisplayName="PostFix Mail Service" IsDaemon="true" DaemonType="SYSVINIT" Path="" StartParameters="" CanBeStopped="true" Enabled="true"/> However, the portal displays this service as stopped. I also tried UPSTART for the daemon type, even thoug…

Good Afternoon, We have been using your pulse way product on windows machines for a few years now and are very impressed with it, as it’s been a life saver many of times. This week I have tried implementing the monitoring agent on one of our Ubuntu 12.04 LTS boxes which are running a big data platform powered by HPCC Systems. I have pretty much configured it so it will tell me if drive space is low, CPU usage is high, free memory is low, whether the machine is off or on etc., but I am having problems getting it to tell me of these services HPCC components are running : mydafilesrv mydali mydfuserver myec…

We configured a Pi2 with Pulseway and it is working fine. We cloned the SD card and changed the system name and config.xml to the new device name. They also have different ip adresses. In the Pulseway monitor they are displayed as the same device, (the name changes continue) How can we configure and see theme as seprate devices, is there u Unique identifier we have to change.

Hi guys, I have a linux server with Openfire Installed. Recently we have a problem where the Openfire service stops and has to be restarted. I am trying to configure pulseway on this server to monitor the service. At this point, the server shows up on my Pulseway Dashboard. However, when the openfire service is stopped, i do not get any notification. Any help would be greatly appreciated. Below is a copy of my current configuration. <!--Monitored Services--> <MonitoredServices> <!--Service - Name: "openfire" - DisplayName: "OpenFire" - IsDaemon: "true" - DaemonType: "SYSVINI…

I have two Linux servers, one running Jessie, the other running DietPi. The Jessie is running on a RPi 3 with external 2TB HDD connected by USB2, the Pulseway client is installed working and monitors the drive just fine, alerts when getting too low and everything. The DietPi is running on an Odroid-XU4 board, is monitoring services with Pulseway just fine, but now I have added a 6TB external HDD to the USB3 port. I am able to get to the drive just fine, and put files on it. But I cannot monitor the drive through Pulseway. The config file is virtually identical with the RPi, with the obvious differences in name and services monitored. <LowHDDSpace>…

I have a Ubuntu Linux machine that I have setup to monitor a number of network resources. One of the things I want to do is pick a few locations across VPN's to look for any latency issues. When I setup my config.xml with multiple servers, I only seem to look at the first server. Here is an example (IP's changed to protect the innocent): <!--Network--> <Network> <!--Ping - Server: server IP address or hostname--> <Ping Server="1.2.3.1" Enabled="true"/> <Ping Server="1.2.3.2" Enabled="true"/> <Ping Server="1.2.3.3" Enabled="true"/> <Ping Server="1.2.3.4…

ERROR I installed successfully Pulseway on my MacBook and on my main Rig, I'm trying to install pulseway on my 2nd laptop with Ubuntu, I followed the procedure showed to install, I edited the Xml sample file with username and password and tried to start pulseway but if I request service pulseway status it shows me this error. any suggestion?

Hi, I'm having a problem to set up a Group (Test, for example) in config.xml. After change file, the server appear in dashboard, but in a "Legacy" group. Wen I edit config.xml again, the group name is replaced to "Legacy" See bellow: Sorry, I don't speak fluently english....

Hi, I activated a trial today, and I'm trying to install a linux agent to see how it works. After installing the package, I can't seem to activate the agent, it get this error in the syslog MM.Monitor.WebService.InvalidAccountException: Invalid username and/or password (295).#015#012 at MM.Monitor.WebService.Data.#002(Account #002, String #003, String #005, String #010, String #006, Boolean #016, String #017, Boolean #002"#012Detail: [no detail] I've tried on 2 machines, both debian 10, both webservers hosted on aws. the username and password I am using are those I set up for the access to the web administration console. Can you please tell me …

I have an Ubuntu server that Pulseway failed to work after the 8.0 upgrade. I left it for awhile and installed the new version which is now working. The group shows default site...... - Legacy. I stopped the service, verified the computer went offline and service had stopped, changed "Legacy" to my domain name, saved the XML then started the service. When it popped back online it still showed Legacy. I pulled the XNL and sure enough Pulseway changed it back. Did it again and again the service changed it back. Tried again, this time removing it client side, but still reverted when it populated. Why does the service keeps ignoring my settings and reverting to what I can onl…

Can anyone point me to the Linux Agent 8.* /etc/pulseway/config.xml documentation?