Marius Posted July 1, 2013 Share Posted July 1, 2013 SNMP Server module allows SNMP agent exploring, crawling for exposed variables, displaying real-time values on the mobile clients and monitoring variables for changes using configured rules. Agent discovery is supported, you click the “Run Discovery” button and watch how SNMP agents get added. Exporting and Importing is also possible to ease the process of configuration backup and migration. Send notifications when a selected SNMP agent variable value meets a certain condition: Paul 1 Link to comment Share on other sites More sharing options...
Strongroom Posted July 3, 2013 Share Posted July 3, 2013 Almost working - I've enabled the SNMP Server module, discovered the devices and setup a couple OID to read, but I'm not able to find the SNMP Agents within the Web or iPhone dashboard. Am I missing something? Link to comment Share on other sites More sharing options...
Marius Posted July 3, 2013 Author Share Posted July 3, 2013 the iOS app will be available shortly as well as the WebApp. Link to comment Share on other sites More sharing options...
spammy Posted March 5, 2014 Share Posted March 5, 2014 Some questions: 1) Can this be done on the personal free account? 2) What to do if you have no windows machine? Link to comment Share on other sites More sharing options...
Marius Posted March 6, 2014 Author Share Posted March 6, 2014 Hi, The SNMP server module is not available for the free accounts and for now it is only supported by the Windows agent. We are working to bring it to the Linux agent too. Hope this helps. Marius Link to comment Share on other sites More sharing options...
affer Posted March 5, 2015 Share Posted March 5, 2015 Can the missing pictures be updated? i am not sure i can find greather than, only equal og not equal in my setup is apperently available (under variable) see attached file. i have only tested with SNMP on a printer, in number of documents. but i would like to see greater than, so i can be sure the notification will be triggered. //Rasmus Link to comment Share on other sites More sharing options...
Staff Chris Posted March 5, 2015 Staff Share Posted March 5, 2015 Hi Rasmus, We will update the missing images soon. To see the greater than, greater or equal than, lower than, lower or equal than options you need to mark the variable as an Integer variable. From Server Modules -> SNMP -> Edit SNMP Agent -> Variables -> Edit SNMP Variable set the Type to Integer and then you will be able to configure integer notifications. Regards, Chris Pulseway Support Link to comment Share on other sites More sharing options...
affer Posted March 6, 2015 Share Posted March 6, 2015 Ohh thanks, ofcause that is the solution. Thanks for quick reply //Rasmus Link to comment Share on other sites More sharing options...
FuzzyFuzzNuts Posted May 13, 2015 Share Posted May 13, 2015 Hi Team! Trying to add a Draytek Router (DV2820) as an agent, Crawling SNMP variables returns arror 'Bytes must contain 4 or 16 elements' Adding manual ODI results in 'invalid OID' (using https://www.draytek.com/index.php?option=com_k2&view=item&id=1236&Itemid=293&lang=en as reference) ideas? Link to comment Share on other sites More sharing options...
Staff Chris Posted May 14, 2015 Staff Share Posted May 14, 2015 Hi, It looks like your device doesn't respect the SNMP convention by sending an empty IpAddress body (0x40, 0x00). That violates the standard, as the result should be a Null body (0x05, 0x00). IpAddress is defined in RFC2578, which is strictly of 4 bytes. That's why SNMP checks against 4 bytes. The check against 16 bytes is for IPv6 addresses. Can you try to update the firmware of the device to see if fixes the issue? Regards, Chris Pulseway Support Link to comment Share on other sites More sharing options...
Michel van Son Posted February 8, 2017 Share Posted February 8, 2017 A bit of a gravekick, but is the SNMP module available on linux, more specific, the raspberry pi? I'm currently using a couple of them as Pi Hole DNS servers and would like them to monitor the various SNMP devices as well... Link to comment Share on other sites More sharing options...
Administrators Paul Posted February 9, 2017 Administrators Share Posted February 9, 2017 I'm afraid there is no SNMP module on the Linux agent at this time. Sorry about this. -Paul Link to comment Share on other sites More sharing options...
Michel van Son Posted February 10, 2017 Share Posted February 10, 2017 Paul, That's odd...marius said, almost two years ago, that the SNMP module for linux was coming...what's the hold up ? Link to comment Share on other sites More sharing options...
Administrators Paul Posted February 13, 2017 Administrators Share Posted February 13, 2017 Hi Michel, It's part of our wish list but due to the very little popularity of the Linux agent compared with the immense amount of feedback we receive for the Windows agent this was pushed from the Roadmap. I've brought this up in a meeting today and we're trying on bringing it back on the Roadmap. I apologize for the inconvenience. In the meantime you can create a bash script that will use SNMPGET to query SNMP devices and if the value doesn't meet your criteria then return an exit code (exit [number]) that's not zero to mark the script as failed (which can send a notification if enabled). -Paul Link to comment Share on other sites More sharing options...
acoven Posted August 7, 2017 Share Posted August 7, 2017 Your workaround is pretty cool but I'd like to add my vote to have an SNMP capable Linux agent. Link to comment Share on other sites More sharing options...
pheald Posted March 30, 2019 Share Posted March 30, 2019 I would love this feature as well. Link to comment Share on other sites More sharing options...
Tyson Posted May 25, 2019 Share Posted May 25, 2019 +1 for Linux SNMP. There's a ton of small shops running Pi's to do basic tasks and monitoring. Plus these are used pretty heavily for Ubiquiti device management (a monitoring policy to add sensors for all of their products would be awesome and I'm sure attract some new customers). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now