AnthonyHegedus Posted October 8, 2011 Posted October 8, 2011 It would be useful to be able to notify if a PC's Smart either gets tripped, or too many errors occur
Administrators Paul Posted October 9, 2011 Administrators Posted October 9, 2011 It would be great if we get the full S.M.A.R.T. information for each hard drive. This way we can monitor the RAID status too . Cheers. DanieleCusumano 1
Marius Posted October 9, 2011 Posted October 9, 2011 We will add support for SMART in a future version. DanieleCusumano and Paul 2
FunnyTrickster Posted July 7, 2012 Posted July 7, 2012 Hi All, In the meantime I've set a notification to come up if the following happens: Event Log: System Level: Error Keywords: bad,block Event IDs: 7 Sources: Disk This happened on a work PC but I noticed it, but handy to have it tell you. Paul and Marius 2
Administrators Paul Posted July 8, 2012 Administrators Posted July 8, 2012 I used the following keywords: bluescreen,crash,dump,controller,raid,disk But it was designed to cover a lot more scenarios.
resolver101 Posted October 16, 2012 Posted October 16, 2012 I used the following keywords: bluescreen,crash,dump,controller,raid,disk But it was designed to cover a lot more scenarios. Thanks for the post about what you do. I thought I would add to the community and say what's happened at our place. I've just had a failure on our server RAID and it has had to be rebuilt. I copied the keywords you suggested "bluescreen,crash,dump,controller,raid,disk" and i didnt get a warning. The events created in event viewer are list below. I was hoping of using PCMonitor to warn me when hard drives failures, any ideas how we can capture the failures? Log Name: System Source: HpCISSs2 Date: 15/10/2012 15:50:41 Event ID: 129 Task Category: None Level: Warning Keywords: Classic User: N/A Computer: computername Description: Reset to device, \Device\RaidPort2, was issued. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="HpCISSs2" /> <EventID Qualifiers="32772">129</EventID> <Level>3</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2012-10-15T14:50:41.904Z" /> <EventRecordID>3509648</EventRecordID> <Channel>System</Channel> <Computer>computername</Computer> <Security /> </System> Log Name: System Source: disk Date: 15/10/2012 15:57:21 Event ID: 11 Task Category: None Level: Error Keywords: Classic User: N/A Computer: ????????? Description: The driver detected a controller error on \Device\Harddisk0\DR0. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="disk" /> <EventID Qualifiers="49156">11</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2012-10-15T14:57:21.530Z" /> <EventRecordID>3509670</EventRecordID> <Channel>System</Channel> <Computer>???????</Computer> <Security /> </System>
Administrators Paul Posted October 16, 2012 Administrators Posted October 16, 2012 Hello In this case I would create a second filter along with the ones with keywords that will only include the following source filters: HpCISSs2,disk Paul.
resolver101 Posted October 16, 2012 Posted October 16, 2012 HpCISSs2 is a specific device controller. We dont have that one in our other servers. I was hoping there would be a catch all set of keywords that would notify me of RAID issues. Am i looking for somethings thats not possible with PC Monitor?
Administrators Paul Posted October 16, 2012 Administrators Posted October 16, 2012 You can catch all RAID issues by monitoring the disk source, by default Windows logs all raid events to disk source events.
resolver101 Posted October 18, 2012 Posted October 18, 2012 set the monitoring up as suggested :-) whats he difference between monitoring the SMART and the event notifications?
Administrators Paul Posted October 18, 2012 Administrators Posted October 18, 2012 (edited) Viewing the S.M.A.R.T. data of a device can give you insight of hardware statistics and status, for instance my SSD gives me two counters for the amount of GB read and written and remaining life of the drive. On my HP SmartArray 430 I get RAID status and Raid health. Just google for smart values and I'm sure you will understand. The problem with SMART is that each manufacturer uses it's own set of value types and it's almost impossible of knowing each value id what it means, for instance SMART value id 55 can mean three different things if read on three different manufacturers. Also if SMART get's tripped you know if the drive is faulty and requires replacement. Edited October 18, 2012 by Paul
digbyp Posted October 18, 2012 Posted October 18, 2012 Although not automatic, you can you use the powershell line below which will show true or false. If True, anticipate disk failure at some point. gwmi -Namespace root\wmi -Class MSStorageDriver_FailurePredictStatus -property PredictFailure Paul 1
digbyp Posted October 19, 2012 Posted October 19, 2012 Another thought - create a scheduled task to run powershell script and look for the word True and if found, send an email using powershell
Administrators Paul Posted October 19, 2012 Administrators Posted October 19, 2012 Or have a plugin send a notification for that -regarding my current project- .
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now