Jump to content
amol

Need to uninstall one application from all workstation

Recommended Posts

How do i uninstall one Antivirus from all workstation through pulseway.. then install new one. is there any script available Or do i need to make one and is there any option to push that script through CMD on all workstation ?? Please let me know all available option to perform this task.. thank you..

Share this post


Link to post
Share on other sites

Hi @amol,

Thank you for contacting us. If the antivirus solution was deployed via Pulseway, then you can do it from the Pulseway WebApp -> Antivirus -> Agent status page.

However if the AV solution is not deployed via Pulseway, then this task will be very hard or almost impossible if antivirus provider doesn't support this option, because all Antivirus applications is protected against all removal attempts. And only possible removal can be done by using tools which are built by Antivirus provider. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Mr_JimWest
      I would like to move away from using TeamViewer. LTT was just advertising Pulseway, I thought I would try it out. I installed the Remote Control Desktop client (6.6.3) and the Dashboard client (6.5.1), and proceeded to set up an organization, group, site, and policy. Then I downloaded the "Agent" client to the desktop I would like to be able to remote into. I installed, registered my product, assigned it to my  group, and checked the "Enable Remote Control" box.
      I was under the impression this is all I had to do.
      Although both the Remote Control Desktop and Dashboard show the computer, I'm unable to "Start Remote Control Session". It's grayed out. Interestingly, I am able to view all of the system specs, and even successfully restart the computer via the website!
      What might I be doing wrong?
      Thank you for your time!
    • By dtoxic
      Here is a script for Powershell to set the pc to autologon one time [configurable] after restart, with a 15 sec delay
      Someone may find it handy
      Copy paste into Powershell ISE or txt and then rename to *.ps1
      Tested on Windows 7 X64
       
      $RegPath = "HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" $DefaultUsername = "Insert Username Here" $DefaultPassword = "Insert Password Here" Set-ItemProperty $RegPath "AutoAdminLogon" -Value "1" -type String Set-ItemProperty $RegPath "DefaultUsername" -Value "$DefaultUsername" -type String Set-ItemProperty $RegPath "DefaultPassword" -Value "$DefaultPassword" -type String Set-ItemProperty $RegPath "AutoLogonCount" -Value "1" -type DWord Start-Sleep -Seconds 15 ; Restart-Computer -Force  
    • By Nuno Inácio
      Hi there,
      This is usability issue that leaves Pulseway's surveillance under high suspicion.
      We work exclusively in Windows servers.
      My colleague has installed last week a new Pulseway Agent over a server of a new client and he forgot to report this so that I could increase the number of licences resulting that since last week a Pulseway agent from another client's backup server stopped communicating and so we where not aware that backup needed troubleshooting. In fact the server disappeared from our servers
      As I understood the new Pulseway agent kicked out a random Agent already under surveillance and that means that a server that we had total confidence to be monitored was not.
      I'm new in the company and this software and when I've discussed this with my colleagues they've reported to be a known issue and that sometimes the Pulseway agent that stopped being monitored would varied meaning that one server randomly would stop being monitored and then the behaviour would jump to another agent.
      In the Billing/Overview section of your page it always had 72/72 and so no report of "overbooking".
      For this server's agent to show again in the panel I had to re-register it.
      IMO the new ones should stay offline and if this behaviour cannot be controlled, then the moment a client doesn't have licenses the agent shouldn't be able to register.
      We need to be sure that we can rely on the servers where Pulseway agent is installed and configured or we cannot trust the system altogether.
      Thank you for your attention.
    • By rootwilliamson
      Dear All,
      I am here to buy a new router. Do you have SSTP protocol support router because I need SSTP vpn to connect to my office network. Please reply me soon.
      Thank and Best Regards
      Williamson
    • By sarj2001
      Would love a way to silently install and run Dell command update utility to Dell endpoints to keep drivers up to date, as Dell are frequently rolling out driver updates.
      Has anyone been able to make this work for them? 
      I've looked into it and found some sample scripts on reddit to try and edit and test. the problem I have is getting dell command update to install first, then getting the configuration file out to the required computers that need it, then running the update silently. 
      If someone has managed to get this working, I would love to see how you did it, or kindly ask for some sample scripts to work with?
      Any assistance would be greatly appreciated.
       
×
×
  • Create New...