All Activity

This looks like what I need. I never noticed that report template. Nice.

I will try this and follow up. Thank you.

Hey @Justin Wright - Thanks for reaching out. You can use the tasks in the automation to run it on all the devices and post that run a task execution output report which will show the output of the script on the devices. Reporting > report templates > task execution output templates (refer to image) Let me know if this works for you😊

I'm trying to generate a report for a customer who doesn't understand how much work the automation I have in place is doing. But I can't generate any reports at all. Instead, I get this in my email: The PPD: Task Execution: Reset WUAU report failed to generate:: No systems that support advanced reporting found. What gives? I have everything turned on for monitoring. These are Windows 10/11 computers.

I found a PowerShell script that checks if the machine can run Windows 11. I can see the output in Pulseway after it runs when I click on the execution option. But I would like to run it for all of the customers machines and get the output all at once. Is there an easy way to do this in Pulseway automation?

@Mariale_Pulseway - Thanks. Been down that road already but willing to try again. The result was the certificate DigiCertGlobalRootG2.crt only supports TLS 1.3 whereas I need TLS 1.2. The migration turned this whole well established concept on its head, and even though we have future plans to eventually upgrade our Server Core version, it works just fine now as a Hyper-V solution. So I am turning to the forum to find an answer. Is there a different certificate by chance? I can't imagine that Pulseway would give TLS 1.2 the one finger salute when it is still being utilized. Any ideas would be most helpful, thanks.

Hey @Martin Akamphuber - We don't have this feature available and there's no timeline for this to come back.

Hey @cts6288 @mchristensen - Thanks for reaching out. Our support would be able to assist you with this. I just raised a ticket on your behalf and they'll be in contact shortly😊

Sick of typing “browser not working” like it’s Groundhog Day? We feel you. Your techs have better things to do than copy-paste the same ticket info 47 times a week. Here’s the scenario: A user skips the portal and pings your technician directly (again). Now they have to create the ticket manually. But instead of starting from scratch every time, Pulseway lets you use ticket templates to fill in the usual stuff fast. ⚡ Let’s break it down: Template Time: Create templates for common issues like browser errors or password resets—with fields already filled in and a couple quick prompts for the user. 📝 Timer: Pulseway auto-tracks time spent on tickets so your team doesn’t have to guess later. ⏱️ Pull Reports: Use those tracked hours to show higher-ups how much time goes into common issues—and make the case for more hands on deck if needed. 📊 Got a ticketing pain point you want us to cover next? Drop it in the comments—we’re listening. 👇

Edit: nevermind

NO RESPONSE - WHERE IS THE PULSEWAY TEAM ???

Once again ANY UPDATES ????

Holy cow! Talk nostalgia... You guys helped me out way back in the day! Got another issue which has been a headache ever since the recent migration. My Server Core 2008 (still going strong) was working just fine with Pulseway up until this latest migration. Ugh. For years it worked. I was instructed to uninstall and reinstall by the migration team but now Pulseway Manager 9.14 says service is not installed. Checking the registry shows it is there but not able to load. Good news is that was the backup server. The main server still has PCM 9.14 installed with the original problem. The service is running but there is an error which states "an error occurred while making the http request to https.... This could be due to the fact that the server certificate is not configured properly with HTTP.sys in the HTTPS case..." After further research, it was determined to manually update the cert: DigiCertGlobalRootG2.crt however this one does not use TLS 1.2? We need TLS 1.2! Is there a cert available that provides TLS 1.2? So my first concern is getting Pulseway back to being operational on the main server. Then to somehow fix the backup server's PCM reinstallation. Ideas?

Good afternoon. My Server Core 2008 version was working just fine with Pulseway up until this latest migration. Ugh. For years it worked. I was instructed to uninstall and reinstall by the migration team but now Pulseway Manager 9.14 says service is not installed. Checking the registry shows it is there but not able to load. Good news is that was the backup server. The main server still has PCM 9.14 installed with the original problem. The service is running but there is an error which states "an error occurred while making the http request to https.... This could be due to the fact that the server certificate is not configured properly with HTTP.sys in the HTTPS case..." After further research, it was determined to manually update the cert: DigiCertGlobalRootG2.crt however this one does not use TLS 1.2? We need TLS 1.2! Is there a cert available that provides TLS 1.2? So my first concern is getting Pulseway back to being operational on the main server. Then to somehow fix the backup server's PCM reinstallation. Ideas?

@Milton Polina No worries. I just raised a support ticket on your behalf and someone from our team will reach out shortly😊

I'm on the same boat, will this ever be fixed? Just did a fresh Windows Server 2025 install and the pesky PendingFileOperation is there!

i tried the steps but didnt work, The strange thing is that I also did it on a laptop, only version 22h2 Windows 11, and on Windows 10, but the problem of starting the service persists.

Hey @Milton Polina - Thanks for reaching out. We have a KB with all the steps for this. Here's the link: https://intercom.help/pulseway/en/articles/6354183-pulseway-agent-installation-error-1001 Follow all of them, except for step 5. Let me know if you need more assistance😊

I am installing the pulseway program on a Windows 11 24H2 laptop and when the installation is finished I open the program and the service does not start, I have already restored the computer twice, I installed it again, everything is up to date but the service does not start to register it, and I was looking for some log in the installation folders but I did not find any, could there be a problem because in past installations I installed the program without problem and now it is happening to me today. I tried to start the service manually but it doesn't work. It displays the message "The pulseway service on local computer started and then stopped." Some services are started automatically if they are not used by any service or program. Thanks

Hey @windracer - Totally understand, and thank you so much for using Pulseway! If your needs ever change or you decide to hop back in, you know where to find us😊

Thanks, Mariale but I'm not going to "upgrade." I only was using Pulseway to monitor a handful (3) of devices and it's not worth the additional setup. Thanks anyway for a great service while it lasted.

It would be beneficial if we could close/cancel/deactivate our accounts without contacting the support, which is not an easy thing btw. Please get in touch so we can perform the service cancellation.

Tired of babysitting new machines just to get them patched right? We get it. You’ve got better things to do than click around chasing every new install like it’s a rogue Pokémon. Here’s the scenario: A new machine shows up. Instead of waiting on a manual trigger or even a regular notification schedule, Pulseway gives you the option to work ad hoc or notification-based. As soon as you install Pulseway for the first time, you’ll get a "system registered" alert. That alert is your magic trigger. From there, you can kick off a workflow like this one: Trigger Workflow: Use the "system registered" alert to start the automation engine. Assign Patch Policy: Automatically run the patching policy assigned to the group/org the machine belongs to. Reboot Prep: Before rebooting (because we all know it’s coming), send a message to the user “Heads up! Reboot in 10 minutes”. Schedule Reboot: Now that they’re warned, schedule the reboot time and close the loop. 🔁 It’s simple. It’s clean. And it saves you from 100 tiny headaches. No more micro-managing patch rollouts one device at a time.

Hey @windracer - Thanks for reaching out! Yes, the free and pro accounts aren't available anymore, but you can migrate to a new instance via the link you sent. Let us know if you need any assistance😊

Not sure how it took me this long to realize the Pulseway app on my iPhone was showing the red dot for notifications but when I opened it all tabs just show "forbidden." I didn't realize the free tier was being shut off completely (I've been using it since 2011 when it started out as Mobile PC Monitor). https://www.pulseway.com/land/migrate-to-team :(