PC keeps waking up after the latest update

Any idea?!

 

Hi @ansred,

I know it's a bit to late, however if this is still an issue, then I would suggest you to set up network traffic tracing on another system and then record a network traffic. This will allow us to determine from where are you receiving these Wake Up commands.

None of our customers has reported similar issue.

Hi @Chris

I found the issue.

Per the Firewall logs, some Geo-China IP addresses keeps hitting the NAT policy with UDP 9 and that wakes my PC!

For example here is some trusted source of traffic coming from you (Pulsway) When I wake my PC

 

FWAllowEnd
disp=Allow
pri=6
policy=Wake On Lan - UDP-9-00
protocol=discard/udp
src_ip=69.65.40.236
src_port=60205
dst_ip=192.168.0.10
dst_port=9
dst_ip_nat=10.0.12.13
src_intf=0-eth0-External
dst_intf=2-eth2-TP-Link
rc=106
duration=30
geo_src=USA
rcvd_bytes=0
sent_bytes=1052
3000-0151

 

 

 

 

Another bad traffic looks like this:

FWAllowEnd
disp=Allow
pri=6
policy=Wake On Lan - UDP-9-00
protocol=discard/udp
src_ip=114.114.114.114
src_port=53
dst_ip=192.168.0.10
dst_port=9
dst_ip_nat=10.0.12.13
src_intf=0-eth0-External
dst_intf=2-eth2-TP-Link
rc=106
duration=30
geo_src=CHN
rcvd_bytes=0
sent_bytes=121
3000-0151

 

 

 

 

Could you please provide FQDN that contains the list of your IP addresses used for WakeOnLan service please.

 

Thanks

 

That would be:

s1.pulseway.com
s2.pulseway.com
s3.pulseway.com

-Paul