Linux

What is this error? [root@~]# /etc/init.d/pcmonitor status pcmonitord (pid 23215) is running... [root@myomni ~]# /etc/init.d/pcmonitor status Message from syslogd@at Mar 27 06:19:39 ... * glibc detected *** /usr/sbin/pcmonitord: double free or corruption (fasttop): 0x00000000023c4a40 *** pcmonitord is stopped [root@~]# /etc/init.d/pcmonitor status pcmonitord is stopped [root@myomni ~]# uname -r 2.6.32-358.0.1.el6.x86_64 [root@myomni ~]#

Is there a way to install pc monitor on Raspberry Pi running Openelec? I can connect to the Raspberry pi via ssh but commands are limited. There’s no dpkg command nor does apt-get work. Best option of course would be a normal xbmc add-on support. Would that be possible?

I was deploying the agents to a very large amount of linux clients (various flavours), we have a chef infrastructure in place so decided to leverage this. I have created a cookbook that gets the latest download .deb or .rpm and install it and configures the config.xml. You can use chef to set all the various options via attributes. feel free to use https://github.com/py-man/chef-pcmonitor and modify. cheers

Can't get the service to start, logs are showing Mar 13 13:55:17 raspberrypi pcmonitor: Configuration: expected ' or "

I am running Ubuntu 12.04.4 on an older Compaq nc6000 laptop. I got the .deb file downloaded and I ran the install as directed, receiving this... ****************************************************************** *** Beware, you must create the configuration file for PCMonitor! *** We provide an example of complete configuration in *** /etc/pcmonitor directory (config.xml.sample). You can use it *** to create your own custom configuration and then *** start pcmonitor using command: /etc/init.d/pcmonitor start ***************************************************************** So I edited the config.xml.sample file, entering my username and password, then tried to st…

Is there a way to have the service auto start in linux? anyone try this? I am running fedora . .

Hi, can I monitor Moint Points with pc-monitor, I couldn´t find a switch in config.xml. regards

Hi, is there any way to stop spamming the syslog with this frequent message: "pcmonitor: Publish will sleep for: 16" Thanks, Csaba

I have followed all your instructions on your sites but I still seem to be struggling with regards to getting this to install properly I follow the instructions on how to remove and install via manual upgrade I get the below message when I try and kill the process after removing via dkpg When I re-install it installs to /etc/pcmonitor but the only files in there are config.xml and config.xml.sample Is there something I am missing?

Hi! Some of our newer native Linux client are having trouble registering with our server. Seems identical to jmcclane's Raspberry Pi problem (http://forum.pulseway.com/topic/1065-raspberry-pi-problem/). /var/log/warn shows: Feb 13 14:14:37 linux-ue2u pcmonitor: Error while registering computer:SOAP 1.1 fault: SOAP-ENV:Client[no subcode] "SSL_ERROR_SSL error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed" Detail: SSL_connect error in tcp_connect() uname -a: Linux linux-ue2u 3.11.6-4-default #1 SMP Wed Oct 30 18:04:56 UTC 2013 (e6d4a27) i686 i686 i386 GNU/Linux (openSUSE 13.1) Outputs to commands Calin requested from …

Hey folks I have configured PC Monitor on my MacBook Pro, Ubuntu 12.04 and iPhone. I can monitor hardware stats like CPU Temperature from my MacBook Pro with my iPhone without any problems. When I try to monitor the temperature from my Linux Machine, I fail. What do I have to add in the config.xml to monitor the linux temps? Is this feature supported from PC Monitor? If not, are there some plans to add this feature in the near future? Thanks for help

Hello there! I had three Linux systems monitored and everything worked fine untill yesterday. Then one raspbian was reported offline around noon, other some time later, and when I booted old laptop with Debian it reported coming online on my iphone, only to go offline few minutes after that. All machines were online all the time, only pcmonitor service stopped working and can not be started. Funny thing is that when I start it again it appears to actually work for few seconds before dying again. I can see that because iphone app says that system went offline few seconds ago. Besides that I montiror one Windows 7 PC and I have no problems with that. I haven…

Hi, I have installed the deb (latest one, from website) and setup the xml setup file, but the Raspi doesn't show up in the system-list. cat /var/log/syslog | grep pcmonitor shows: GET_SERVER_CERTIFICATE:certificate verify failed"#012Detail: SSL_connect error in tcp_connect() Jan 24 16:32:23 raspbmc pcmonitor: Error while registering computer:SOAP 1.1 fault: SOAP-ENV:Client[no subcode]#012"SSL_ERROR_SSL#012error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed"#012Detail: SSL_connect error in tcp_connect() THX!

Hey Guys, I am new to PC Monitor and Raspberry Pi, and I have run into some issues and I have some questions. I will start from the top. First, I am having issues with the RPI going offline. It seems to happen when I try accessing the RPI from the Iphone App (My main method). I have the RPI setup to ping a single device, and it seems that whenever I look at the ping responses on the iphone, the RPI drops offline completely. Usually after a while it comes back online. Today it actually went offline for a few hours. The only way I could get it back on was to restart the process. (It showed Failed When I checked the status of the process. Where do I go from here? Are the…

Greetings...I have installed and configured the pcmonitor service and config file as per instructions and when I start the service all looks well but when I type in status command I get root@raspberrypi:~# /etc/init.d/pcmonitor status [FAIL] pcmonitor is not running ... failed! But when I type in restart command it look good root@raspberrypi:~# /etc/init.d/pcmonitor restart [ ok ] Restarting pcmonitor: pcmonitor. I do not see the system listed obviously on my account. Any help would be appreciated

Hi, I have installed the deb and setup the xml setup file with my username and password. But this is showing in the log: pi@raspberrypi /etc/pcmonitor $ cat /var/log/syslog | grep pcmonitor Jan 17 10:38:34 raspberrypi pcmonitor: Error acquiring unique lock. Another process may use the file. Code: 9 Jan 17 10:39:42 raspberrypi pcmonitor: Error acquiring unique lock. Another process may use the file. Code: 9 Jan 17 10:46:42 raspberrypi pcmonitor: Error acquiring unique lock. Another process may use the file. Code: 9 Any help please?

Hi, I have installed the software, copied config.xml.sample to config.xml, edited the ACCOUNT USERNAME and PASSWORD in the config,xml file and started the PC Monitor service. But my RASPBERRY Pi does not show up under SYSTEMS in the console.

On my two home Ubuntu 12.04 boxes (VMs under esxi 5.1), the agent runs great. (Also seeing the issue on these servers as well, see post below) On the server I lease, I cant get it to stay alive. I am seeing these errors: user@server:/var/log$ sudo cat syslog | grep pcmonitor Jan 13 22:38:51 server pcmonitor: *** glibc detected *** /usr/sbin/pcmonitord: double free or corruption (fasttop): 0x0000000000d07ea0 *** Jan 13 22:40:03 server pcmonitor: Error while registering computer:Empty response user@server:/var/log$ date Mon Jan 13 22:42:45 EST 2014 user@server:/var/log$ sudo cat syslog.1 | grep pcmonitor Jan 12 13:21:47 server pcmonitor: Received request Resume…

Hi, installed x86_64 pcmonitor service on Centos 6.5 (Xen VPS) but on trying to start the service I am getting [root@vps1 ~]# tail /var/log/messages Dec 31 08:41:15 vps1 pcmonitor: Got exception signal: 11 Dec 31 08:41:15 vps1 kernel: pcmonitord[1224]: segfault at 0 ip 00007f9b089ce312 sp 00007f9b074e0f38 error 4 in libc-2.12.so[7f9b0889a000+18b000] from /var/log/messages. The service appears to start as it says 'ok' on command line but restart shows 'failed' to stop so is not running. [root@vps1 ~]# uname -m x86_64 My config file looks ok I think, I can post it up if you need (obviously xxxx 'ing out the 'sensitive' details) Am I missing some dependencies o…

I have CentOS VPS server. I decided to update pcmitor agent by installing it on top of existing , fully functional installation. [root@ ~]# wget http://www.pulseway.com/download/pcmonitor_x64.rpm [root@ ~]# rpm -ihv pcmonitor_x64.rpm [root@ ~]# /etc/init.d/pcmonitor start Service wont start and i get this instead when i do status: pcmonitord dead but subsys locked here is what i got from /var/logs/messages Dec 28 19:36:12 control pcmonitor: Got exception signal: 11 Dec 28 19:36:12 control kernel: pcmonitord[3144]: segfault at 0 ip 0000003b62e80eb0 sp 00007ff6c39ccf38 error 4 in libc-2.12.so[3b62e00000+18b000] Dec 28 19:36:12 control abrtd: Directory 'ccpp-2013-12-…

Hi All, i'm running 2 ubuntu 12.04 servers (we are virtualized on vsphere 5.1).. i followed the install guide and the monitors are up and running.. however i've got one sticky issue and i'm not sure whats causing it. randomly it seems the pcmonitord process just stops. if i restart it from the command line they report.. then maybe an hour to 4 hrs later it stops and i have to restart the process again. any ideas? the windows servers are working great and no issues with the software at all. i love the software, its honestly already paid for itself... wish i had found you earlier! thanks -monte

I am testing PC Monitor out on my home network. Everything is going well, except I cannot seem to get stats for eth0 on my Linux machines. All other data (CPU, Disk, etc) is showing just fine for the two Ubuntu 12.04 systems, only network data is absent. I followed the install guide from this forum and edited the config file appropriately (I think). What am I doing wrong? Can anyone confirm they get network data on Ubuntu 12.04? My config and ifconfig output are below. Thanks, Brian My config.xml: <config xmlns="http://www.pulseway.com/linuxconfig"> <!--Account Information--> <!--Username: Your Mobile PC Monitor username--> <!--Passw…

I have installed the x64 RPM file on a CentOS 6 system. I have configured the config.xml as attached (it has been sanitised). When I start up the service, I get the following errors in /var/log/messages: This is then continually repeated until I shut down the service. Can you please assist? config.xml