trixor Posted October 7, 2014 Posted October 7, 2014 Hi..! We have multiple Debian Linux installations, but suddently Pulseway stopped working.. root@Marine-RPS:~# /etc/init.d/pulseway start /usr/sbin/pulsewayd: error while loading shared libraries: libidn.so.11: cannot open shared object file: No such file or directory What happend since yesterday? - Has there been an automatic update or something on pulseway? //Dennis
Staff Mark Posted October 7, 2014 Staff Posted October 7, 2014 Hi Dennis, Can you, please, check if you have libidn installed? sudo apt-get install libidn11 Regards, Mark
castumon Posted October 7, 2014 Posted October 7, 2014 I have a similar issue with my CentOS6 hosts, since yesterday. Daemon stops immediately after start , without any message... root@zabbix:~ #/etc/init.d/pulseway status pulsewayd wurde beendet root@zabbix:~ #/etc/init.d/pulseway start Starting pulseway daemon: [ OK ] root@zabbix:~ #/etc/init.d/pulseway status pulsewayd wurde beendet root@zabbix:~ #
Staff Mark Posted October 7, 2014 Staff Posted October 7, 2014 I have a similar issue with my CentOS6 hosts, since yesterday. Daemon stops immediately after start , without any message... root@zabbix:~ #/etc/init.d/pulseway status pulsewayd wurde beendet root@zabbix:~ #/etc/init.d/pulseway start Starting pulseway daemon: [ OK ] root@zabbix:~ #/etc/init.d/pulseway status pulsewayd wurde beendet root@zabbix:~ # Hi, There is anything in logs? (/var/logs/messages)? Regards, Mark
castumon Posted October 7, 2014 Posted October 7, 2014 The message was: pulseway: Configuration: No or empty 'Server' attribute found for 'Certificate' node 1 After I have installed the actual agent from scratch, I compared the new config.xml with the used one. In the latest version, the parameter is called "Server", in the previous version, it was "ServerName". After I have renamed the parameter in config.xml, the agent is running again...
Staff Mark Posted October 7, 2014 Staff Posted October 7, 2014 Great! Good to hear that is working again. Just bear in mind that config.xml from java linux client (old) is not 100% compatible with native linux client (new). Regards, Mark
trixor Posted October 8, 2014 Author Posted October 8, 2014 Hi Dennis, Can you, please, check if you have libidn installed? sudo apt-get install libidn11 Regards, Mark Hi Mark... No... I wasn't present, i have installed the package and Pulseway is now running.. But please tell me, why this was'nt an issues before? - And how do i avoid this problem in the future..? - It's very unsettling, knowing that Pulseway stops working because of updates on your part...
castumon Posted October 8, 2014 Posted October 8, 2014 The message was: pulseway: Configuration: No or empty 'Server' attribute found for 'Certificate' node 1 After I have installed the actual agent from scratch, I compared the new config.xml with the used one. In the latest version, the parameter is called "Server", in the previous version, it was "ServerName". After I have renamed the parameter in config.xml, the agent is running again... Unfortunately, it was only running for two hours... Oct 8 01:36:53 pulseway: curl_easy_perform() failed: Couldn't resolve host name Oct 8 01:36:53 pulseway: *** glibc detected *** /usr/sbin/pulsewayd: munmap_chunk(): invalid pointer: 0x00007f38d97fa740 *** Oct 8 01:36:53 pulseway: Got shutdown signal: 6
Staff Mark Posted October 8, 2014 Staff Posted October 8, 2014 Unfortunately, it was only running for two hours... Oct 8 01:36:53 pulseway: c Oct 8 01:36:53 pulseway: *** glibc detected *** /usr/sbin/pulsewayd: munmap_chunk(): invalid pointer: 0x00007f38d97fa740 *** Oct 8 01:36:53 pulseway: Got shutdown signal: 6 Do you have any network issues? Looks like "curl_easy_perform() failed: Couldn't resolve host name" trigger the crash...and this point to a network issues. Mark
Staff Mark Posted October 8, 2014 Staff Posted October 8, 2014 Hi Mark... No... I wasn't present, i have installed the package and Pulseway is now running.. But please tell me, why this was'nt an issues before? - And how do i avoid this problem in the future..? - It's very unsettling, knowing that Pulseway stops working because of updates on your part... Libidn is part of default installation on all distributions (at least the ones that we test pulseway on). We'll do more investigation but libidn it's a dependence for pulseway package (like openssl, wget and ca-certificates). Mark
Staff Mark Posted October 8, 2014 Staff Posted October 8, 2014 Unfortunately, it was only running for two hours... Oct 8 01:36:53 pulseway: curl_easy_perform() failed: Couldn't resolve host name Oct 8 01:36:53 pulseway: *** glibc detected *** /usr/sbin/pulsewayd: munmap_chunk(): invalid pointer: 0x00007f38d97fa740 *** Oct 8 01:36:53 pulseway: Got shutdown signal: 6 Can you enable core dump on your machine? Will be great if we can analyse the crash. Mark.
trixor Posted October 13, 2014 Author Posted October 13, 2014 The problems just keeps comming...! Oct 13 14:51:36 Marine-RPS pulseway: Configuration read successfully! Oct 13 14:51:36 Marine-RPS pulseway: *** glibc detected *** /usr/sbin/pulsewayd: double free or corruption (!prev): 0x0000000001cc93d0 *** Im all out of ideas..
trevynmace Posted October 13, 2014 Posted October 13, 2014 My two cents probably doesn't even matter because I'm using an "unsupported" flavor of Linux (Gentoo) but I thought I would mention that this issue is happening with me as well. At first I would try starting the service (it stopped running 6 days ago, non-prod servers and I didn't get a chance to look at them until now) and it would give me the error saying it couldn't find the libidn.so.11 file or directory, so I did an emerge libidn11 This solved the problem with running the service, so it will now start, but it will only run for a very short amount of time until it stops without cause. I am actually fairly new to using gentoo linux so I'm not sure where to look for the log for why it keeps dying.... or if Pulseway itself has a log file, I cannot locate it. Would love any help!! Even thought it's not "supported" Thanks!
Staff Mark Posted October 14, 2014 Staff Posted October 14, 2014 Hi, We'll have a solution with "Gentoo flavour" soon Pulseway outputs to system logs, /var/log/messages. Have a look there. Mark
glberen Posted October 20, 2014 Posted October 20, 2014 Mine too was working and suddenly stopped 6 days ago. I'm on Arch, using the Arch package just released. pulseway.service: control process exited, code=killed status=11 Oct 20 16:43:46 rs232 systemd[1]: Failed to start Remotely Monitor and Control IT Systems.
castumon Posted October 21, 2014 Posted October 21, 2014 Do you have any network issues? Looks like "curl_easy_perform() failed: Couldn't resolve host name" trigger the crash...and this point to a network issues. Mark There were no core files written, but anyway the agent is now running since 6 days. I haven't change anything on my servers...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now