Monitor HDDs / SSDs in a simple client

[cjs1976]

Hi,

it seems that Pulseway has some troubles monitoring a simple harddisk (or solid state disk). Are there any solutions?

Thanks,

Christian.

[Paul]

Hi Christian,

Are you referring the hardware monitoring (temperatures / remaining life) or to the free disk space monitoring? What is the manufacturer and model of your SSD?

-Paul

[cjs1976]

Hi Paul,

I want to know if the harddisk is ok or if it has any failures, especially for RAID. I got to know if the disks are there and ok.

Thanks,
Christian.

[Paul]

For RAID monitoring we've seen successful implementations through SNMP and Event Log. I could give some examples if you would tell me what RAID adapters you're using.

-Paul

[cjs1976]

Hi Paul,

Actually I have the following servers:

1. DELL PowerEdge R330

2. No Brand with Fujitsu mainboard and an MegaRAID SAS 9260-4i

3. No Brand with an MSI MS-7816 motherboard an the on-board Intel RAID.

Thanks,
Christian.

[Cor van Vaneveld]

I would like to monitor the following SSD'S

1: SSD 850 EVO 0120GB (MSATA3

2: SSD 850 EVO 0250GB (2.5 inch / SATA3 / 6GB/S / MLC)

[Paul]

Hi Cor,

You should be able to monitor the Samsung SSDs through the health checks, if you want to check the RAID status please tell me what type of RAID adapter do you have?

@cjs1976, try the OIDs from this page for the DELL server.

-Paul