Jump to content

PC keeps waking up after the latest update


ansred

Recommended Posts

  • 3 weeks later...
  • Staff

Hi @ansred,

I know it's a bit to late, however if this is still an issue, then I would suggest you to set up network traffic tracing on another system and then record a network traffic. This will allow us to determine from where are you receiving these Wake Up commands.

None of our customers has reported similar issue.

Link to comment
Share on other sites

Hi @Chris

I found the issue.

Per the Firewall logs, some Geo-China IP addresses keeps hitting the NAT policy with UDP 9 and that wakes my PC!

For example here is some trusted source of traffic coming from you (Pulsway) When I wake my PC

 

FWAllowEnd
disp=Allow
pri=6
policy=Wake On Lan - UDP-9-00
protocol=discard/udp
src_ip=69.65.40.236
src_port=60205
dst_ip=192.168.0.10
dst_port=9
dst_ip_nat=10.0.12.13
src_intf=0-eth0-External
dst_intf=2-eth2-TP-Link
rc=106
duration=30
geo_src=USA
rcvd_bytes=0
sent_bytes=1052
3000-0151

 

 

 

 

Another bad traffic looks like this:

FWAllowEnd
disp=Allow
pri=6
policy=Wake On Lan - UDP-9-00
protocol=discard/udp
src_ip=114.114.114.114
src_port=53
dst_ip=192.168.0.10
dst_port=9
dst_ip_nat=10.0.12.13
src_intf=0-eth0-External
dst_intf=2-eth2-TP-Link
rc=106
duration=30
geo_src=CHN
rcvd_bytes=0
sent_bytes=121
3000-0151

 

 

 

 

Could you please provide FQDN that contains the list of your IP addresses used for WakeOnLan service please.

 

Thanks

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...