high upload bandwidth used for Pulseway

[Otavio]

Hello i´ve been noticied a big use of outbound data from monitored servers. One in case run a simple webserver(webspeed) without connections and i could monitor it in focus.

The use of link it´s big only for monitored machines. as you can see on below.

#	Src IP	Src Port	Dst IP	Dst Port	Protocol	Src Iface	Dst Iface	Flow Type	IPS Category	Expiry (sec)	Tx Bytes	Rx Bytes	Tx Pkts	Rx Pkts	Flush
1	10.0.1.41	8289	69.191.244.221	8292	TCP	X0	X1		N/A	899	17738287	101042490	328617	565791
2	10.0.0.163	5060	172.30.1.106	5060	UDP	X0	X1	SIP Control	N/A	29	16372793	0	44559	0
3	10.0.0.15	54061	69.65.50.4	443	TCP	X0	X1	HTTPS	N/A	896	13574159	12279588	23854	33905
4	10.0.0.23	52034	69.65.50.5	443	TCP	X0	X1	HTTPS	N/A	897	9888907	7991923	32918	32225
5	10.0.0.17	4705	69.65.50.4	443	TCP	X0	X1	HTTPS	N/A	894	6808214	6131252	14136	16866
6	10.0.0.30	51211	69.65.50.6	443	TCP	X0	X1	HTTPS	N/A	895	5936065	5331351	10444	14720
7	10.0.0.18	61546	69.65.50.4	443	TCP	X0	X1	HTTPS	N/A	896	4415782	3983527	7784	11014

the servers of line 3,4,5,6,7 and another with i reset the service was been there too.

looking for conexion IP(69.65.50.4 , 5, 6 ) it´s from servernap.net.

Based on this, what is this?
What data the servers are sending that use all of my link?
Someone can explain me?

Thanks

[Chris]

Hi Otavio,

The traffic seems low: 17738287 bytes (17.73MB), what values did you expect?

Chris