Jump to content


  • Posts

  • Joined

  • Last visited

Everything posted by Jaapyse

  1. Hey Paul, After an hour of research we are not sure whether we can recreate the problem or not. We have seen a similar problem before, when testing, but now we cannot recreate the problem in that particular network. For now we will try to implement Pulseway in some more networks and I will hauler when we see the problem again. Thank you very much for your support! - Jaapyse
  2. Update: It turns out that this is the first (and currently the only) network with multiple agents in it. If it were just the one network, I wouldn't care, but we have various networks where monitoring still needs to be set up where two or three agents are necessary. Is this a known bug, a feature or is there a workaround? Thanks in advance, Jaapyse
  3. Hey Chris, The system is in a different network. Here's a strange thing I just noticed. While the Windows 7 "server" was able to connect, the Hyper-V wasn't. Then the Win7 all of a sudden stopped and I posted the update. The Hyper-V then started working. A few minutes ago the Win7 could connect again and... surprise!... the Hyper-V couldn't. Date & time are set correctly, and since both machines have been able to connect I assume that DNS is set correctly as well. I'm starting to think that the router only allows one outbound connection to the enterprise server at the same time or that the enterprise server has somehow reached some kind of limit. It can't be the amount of systems, because we're only halfway through with those. Strange problem... - Jaapyse
  4. Hey Chris, The message I get is the following: There was no endpoint listening at https://ourenterpriseserver.com/Server.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details. Even after adding the firewall rule it says so. It shows the error in a pop-up menu. Any ideas on how to fix this? Thanks in advance, Jaapyse Update: Another server in the network just went "offline", however I can reach it by RDP. This server now gives the same error when I ask it to validate the account. This means that the problem is not likely caused by Hyper-V, but by something else. I am now trying to find out what. At the time that the second server went offline I was not logged in to it, in fact I was not making any changes in the network at all. Should I maybe start a new topic on this? - Jaapyse
  5. How about firewall rules for enterprise servers? I can't get it to work. - Jaapyse
  6. Hey Chris, We are very interested in this feature. Can you maybe give us an ETA? Will it be somewhere in the upcoming months? In case not, is it difficult to write a plugin for this? Thanks in advance, Jaapyse
  7. Hi Chris, Thank you very much! This will help us very much!!! - Jaapyse
  8. Hi Chris, Is it at least possible to put labels on values? E.g.: when a certain oid returns 1 it says "Available", 2 says "Unavailable", 3 "Connecting", 4 "Disconnected" and 5 "Others". This is a real example that I took from the Synology NAS firmware upgrade oid. We currently have to remember the meaning of these numbers or check the documentation in order to know whether a firmware upgrade is available or not. I would like to hear from you how to fix it and I am looking forward to your reply! - Jaapyse
  9. Hey Paul, I am currently working on monitoring various systems with HP Proliants and for me it would just be enough if I could do an HTTP GET "ping" to the web interface of the ILO to see if I can access it. I would need to do that from our own Pulseway server. Is that possible? If not, is there a workaround? Thanks in advance! - Jaapyse
  10. Hi Chris, Is there maybe a workaround for it at the moment? Some of our customers demand insight in their systems and they will not be satisfied by strange numbers. - Jaapyse
  11. Hello, At the moment I am working on setting up SNMP to monitor the amount of storage used on a Synology NAS. I am able to get the size and amount used with the hrStorageSize and hrStorageUsed (. & ....6) but it displays it as a "random" number. Of course this number is not random, it is expressed in hrStorageAlocationUnits (....4), which is expressed in bytes or kilobytes or something. What it waters down to is that the "random" number can be calculated into an normal number like gigabytes. How can I do this in Pulseway? I would like to hear from you as soon as possible. Thanks in advance, - Jaapyse
  12. Hi Chris, Thank you very much for your quick reply! I will attempt this as soon as possible! - Jaapyse
  13. Hello, At the moment I am working on setting up Pulseway for a lot of networks. I want to use SNMP to get a lot of data from the different devices in the network. Since we use a lot of the same devices I am already working on default files that I can use to configure the SNMP agents for NAS's, routers and other commonly used hardware. (Files that I only need to import and tweak to get the right values.) This is working properly. Here is the problem though: after importing the SNMP agents, I still need to configure all the notifications manually, and that takes even more time then setting up the SNMP agent in the first place. I need to add several hundred SNMP-monitored devices spread out over tens of networks and we simply don't have the time to do this. Is there a workaround for this? This is what I've tried: Importing an entire configuration file instead of just the SNMP agent file. This erased all settings instead of overlaying with the existing ones. To be clear an example: I had configured a router to be monitored by SNMP and added notifications. I then imported a file which had a NAS configured. Instead of what I would expect (the NAS settings would add up to the router settings) it erased the settings of the router and overwrote it with the NAS settings. Even though they can work perfectly fine side-by-side. And frankly, that is where my ideas stopped. So, if there is a solution, I would really like to hear about it. Thanks in advance, - Jaapyse
  • Create New...